Jump to content
SAU Community

No Oil Pressure,..help Please...

gbturbos
 Share

Recommended Posts

NIZR34GTT Community Regular

NIZR34GTT

Posted
Posted
any ideas. On motor way put foot down to over take a moron,

light comes on pull over, growling noise no oil pressure. No smoke etc. . .

carl

He was a moron because ????? he was driving on the freeway ??? or he is responsible for your oil light coming on. ???? please tick the correct answer.

gbturbos Apprentice

gbturbos

Posted
  • Author
Posted
He was a moron because ????? he was driving on the freeway ??? or he is responsible for your oil light coming on. ???? please tick the correct answer.

hmmmm.....this is very helpful... :)

well,....the reason he is a moron is as follows....

in the uk we have 3 lanes

1st lane is for slow moving vehicles ie lorries, cars towing trailers/caravans

2nd lane is for over taking said vehicles.

3rd lane is only used if absolutely needed

he was in 2nd lane, and driving slower than the minimum speed limit, and there was no vehicles in the "slow lane"

hence,...he was a moron....

so, now i ve answered your question, maybe you can answer mine....

carl

tek_01 Proficient

tek_01

Posted
Posted

oil pump could be gone or on its way out but usually they dont go for any reason

sorry cant help u out much

does the oil pressure rise when u slowly rev the engine?

what does it sit at idle? and when going?>

usually from what ive heard the gauge isnt very accurate but the oil pressure light is so if that come on than theres a problem

gbturbos Apprentice

gbturbos

Posted
  • Author
Posted

oil pressure release valve in the collar.

in the collar????

from what i can see from the technical diagrams ive looked at, this magical collar i keep hearing so much about, is an "add on" for the gtr32 crank....and if this is what you mean, it doesnt have a pressure spring

i havent had chance to look at it yet, but the chances are the oil pump has sheared the outer gear teeth, and pump has stopped,..

hence absolutely no oil pressure at all...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...