Jump to content
SAU Community

Recommended Posts

19s are perfect if you want to fill out the guards and make it look better

18s if your after performance

Im running 18 x 10 +10 offset front and rears sits flush with the guards on a gtr :ninja:

get 20's i have them on my car with mods on the car as well.. and it goes fine actually... 20inch fills up he guards better and you wont have to lower it as much as well... if you wanna check out my car have a look at my gallery and you will see that fit nicely dude

Edited by bradley

i stand by my statement of 19's or bigger being for people trying to impress 14 year olds. for starters they make your brakes look like you took them off a barina. secondly they make your ride much rougher which then in turn starts rapidly damaging other things such as suspension and engine mounts, etc. thirdly, if you hit the slightest pothole then you're more then likely to stuff a wheel and tyre, resulting in more money spent. forthly, they are stupidly expensive to buy both the rims and the tyres. fifthly they weigh more than smaller ones, therefore slow you down.

i guess it comes down to whether you are the type of person who likes people to look at you (although in the case of 20" wheels they will probably be looking and saying your car looks like shit), or if you like to spend money on mods that make your car perform better. my experience is that a large portion of people with stupidly big wheels will also usually have no (or very few) mods under the hood.

my experience is that a large portion of people with stupidly big wheels will also usually have no (or very few) mods under the hood.

so true. white leather interior, illuminated make-up mirror, and diamond encrusted tampon holder... they all go with the 20 inch rims.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...