Jump to content
SAU Community

Recommended Posts

Hey there

I have a Silvia with an rb20det in it

Currently one of my coils - second from the back is overheating/melting

and is NOT sparking either.

---It sounds like a WRX-----

What would be wrong?

We have tried a range of new rb20 coils and checked the spark plug and all are fine :sleep:

any help would be appriciated!

cheers

sammy :)

Link to comment
https://www.sau.com.au/forums/topic/160550-coil-help-my-rb-sounds-like-a-wrx/
Share on other sites

could be a dead CAS, although im not sure if its capable of making only 1 not work.

it could also be your igniter pack (again, im not sure if rb20's have them).

then again, it could be a cracked ring/land. get a compression test.

* she lol

we have bought some coils and tried them,

however is it possible that red top and silver top coils are different???

cause despite the fact that we bought 'rb20' coils - they are not exactly the same as the ones in the car.

Red top and silver top coils are totaly different. Just to give you an example, Red top coils fit onto the CA18DET and vise versa. Silvertop coils only fit the Silvertop.

Try getting the right coils, if thats not the problem, then change the igniter (the square thing ontop of the cover) And take that cover off! it traps heat under it and melts coils.

A dodgy CAS wont make one coil not fire, if its the CAS it wont start at all.

Edited by Rancher
Hey there

I have a Silvia with an rb20det in it

Currently one of my coils - second from the back is overheating/melting

and is NOT sparking either.

---It sounds like a WRX-----

What would be wrong?

We have tried a range of new rb20 coils and checked the spark plug and all are fine :)

any help would be appriciated!

cheers

sammy :(

My car has the same problem at the moment it sounds like a outboard motor.

Ive been told it is a temp sensor fouling the plugs?????????

coils are different from the ignitor pack. its the black box that sits at the rear of the engine above the coils

yeah i know, i swear i read it as coil packs when i was replying :( . must have been in another world.

sorry mate.

  • 5 weeks later...

Hey my car is having the same problem i have a s2 r33 and have put splitfire coils, new plugs in, a new cas and the ecu looked at i am going to try a new ignitor pack if this doesnt fix it is there anything else i can try. Cheers

mine did the same thing (rb25) replaced the ignitor pack and all was good but then few days later fryed another ignitor pack turned out to be a dodgy coil that kept frying my ignitor so i replaced with splitfires and bought a 3rd ignitor and all is well now

Hey my car is having the same problem i have a s2 r33 and have put splitfire coils, new plugs in, a new cas and the ecu looked at i am going to try a new ignitor pack if this doesnt fix it is there anything else i can try. Cheers

if you have a series 2 they dont have a ignitor pack, are you sure you got the right splitfire coil packs? as series 1&2 are different

if you have a series 2 they dont have a ignitor pack, are you sure you got the right splitfire coil packs? as series 1&2 are different

Yea i realised that after i posted it lol. I have only had the car a while and it had them when I got the car and it ran fine and have been told the coils where ok by two diferent shops but i will check agaian anyways thanks.

  • 1 month later...

Hiya,

First of all, redtop coilpacks are different from silvertop ones.

Second of all, I think you should double check the wiring into your ECU. Especially since you've done an engine conversion, it's very likely a wiring issue. Look up the wire for cylinder #6 and double check its the right wire for power to that cylinder.

I had the EXACT same issue with my car (RB20 into an R31) and it turned out that the coilpack wire had been spliced directly into the temp sender. The result was a constant signal to the coilpack which melted it. Not fun and not cheap.

Good luck, let us know how you go.

Edited by R31vhead

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...