Jump to content
SAU Community

Recommended Posts

Yep, look at the time...i just got home!!! why? coz i went out with my other car club(not 2 mention). and there was 2 gtst32 and 1 vr4(magna?)and 1 audi A6...ofcoz and my slow as lancer.

we had fun cruising down and trying to reach a good drift spot so they can all up for a drift fun. but unfortunately got busted by cops...we all go pulled over, i wasnt driving my own car, some1 else drove it for me:) and they NEARLY DEFECTED me coz of my flashing blue light atenna on the top of the car, and my bonnet clips!but coz of my talking skill i got out of it:D

the other cars got dicked bad...!!:(

then we meet up around 1 guyshouse gone for a little drift again

the guy driving the 32 drifted and sideways very nicely...but failed when meet up at a street with a S shaped island in the middle.

we followed and saw it airbone. then come to a stop. we pull over got out of the car

the 32 driver was like: **** LOOK AT THIS!

we all inspect the front wheels-->whole chasis bent, wheel stuffed, fan not working...........the back wheel is flatted....now is waiting 2 b towed away........:P

what a nite...

Link to comment
https://www.sau.com.au/forums/topic/16075-busted/
Share on other sites

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

*sigh* you know after ALL that has happened you'd think people would lay low for a while... no they have to go out n do stupid stuff... and in the rain too...

Ah well, drift scars for all involved... that's why people drift on a skidpan or a track and not streets.

As long as everyone's okay its ok.

Link to comment
https://www.sau.com.au/forums/topic/16075-busted/#findComment-329254
Share on other sites

yep yep

but i didnt know they were going down to dandy!

we met up at glen iris:)

never knew they will go ALL THE WAY there

and lucky i wasnt driving...i b so tired following those speedy cars and constant stop trying to figure out what they are doing

geez...! well 1 of the drifter is around 19...i think...he has a mind of a 19....cant say anything about it.

its so silly that we KNEW that there was cops !!! but my driver just followed them to truck a u-eee. thats why we ALL got pulled over...we shoulda gone straight....me got out of it very quick. then drove off pretending we dunno those guys.

the cops were like: what u guys doing at this time of the nite around here?

sen: oh i am just driving her home

me: yes officer, whats going on?why are we got pulled over?

officer: yes, apparently there was drags been going on around here

sen: oh icic

me: oh my god!! thats bad(as if=.=)!!@@

and the officer was checking my wheels (awwww!!!17" they wouldnt dick a lancer for it:D)

then tell me off coz of the antenna and the bonnet clips.

LUCKY they didnt see my gauge,

LUCKY my GT-wing wasnt on at that stage

LUCKY LUCKY@@!!! i am just 2mm close of getting a defected notice. ( the length from the pen to the defect form). then i keep apologizing saying my sister did all this and dunno its illegal

so i got out of it...

the other cars full of guys .....just got stuffed bad~_~

i think 1 of them lost his liscense....

we all meetup again around burwood.... and the A6 went for a spin. they offer me to take a ride i am like NO (too much flash back from accidents of mine)

then they took a spin in 1 of the 32, i would DIE to seat in it! so i chose to sit in the magna following them....going crazy ass on roads and side street

seeing how beautifully the 32 wack the corners ..... and he was trying to go over the S island thinking thats not hard!

now thats why the line bent its front leg~_~

couldnt get home until nearly 5am is coz we all spent time trying to get the bloody wheel off the 32!!! that was hard!

Link to comment
https://www.sau.com.au/forums/topic/16075-busted/#findComment-329349
Share on other sites

haha

yes FOG!! 1 of the reason why the 32 failed to take turns!

yes chop i went with the exclusive ppl and they are telling me off not putting a EXCLUSIVE sticker on LOL

NO1!!!! if that was wills car!!!u know how PAINFUL it will be?

its just another gunmetal 32....ben just bought it not long ago!!!seriously now he trashed it...but NOT AS BAD AS MINE! so they should be happy

yes last nite was

eric, ben, paul, vi, shau, denis and the other 3 guys i forgot their names lol

my little mini disco torche was in use last nite lol

they took it when i gotta drive denis and shaun home around 5am

hope the battery is not dead

and GUESS WHAT

they are still UP FOR SOMETHING on sat...if u know what i mean

i am getting picked up on sat=.= in a mazda 323(shaun's car) if i wanna go....hahah

Link to comment
https://www.sau.com.au/forums/topic/16075-busted/#findComment-329358
Share on other sites

Seriously guys, please drive carefully. Don't do stupid stunts and end up paying money (or totalling your lovely skyline) because you hugged a tree/kerb/traffic light. Or even worse injured or killed. If you want to drag, go to a drag strip, wanna drift, go to a skid pan. Cops start scrutinising everyone because of a handfull of people that want to show off on public roads. It spoils the day for the rest of us. Drive wisely, and boost safely :(

Link to comment
https://www.sau.com.au/forums/topic/16075-busted/#findComment-329481
Share on other sites

and the worst thing is when a 19 year old tries to drift... exactly what drift technique does this 19 yr old have... does he even know how to heel toe? betcha he jus goes into a corner fast and jus brakes a little... if you wanna feel the g forces on tha side pushing against ya seat, go to galactice circus and get in that simulator...

Its not drifting... its being stupid. I woulda thought u'd have known better than to let a bunch of 19 yr olds try to spin their cars out in the rain with fog, in powerful cars...

Link to comment
https://www.sau.com.au/forums/topic/16075-busted/#findComment-329747
Share on other sites

don't blame vickii.. it wasn't her.. she knows enough not to be that stupid.. but some of the younger guys she was cruising with obviously don't. how do you stop people when they are doing that anyway? you can tell them to stop but until the worst happens then they don't listen..

that guy will maybe think twice once he receives the $2k or more repair bill, if he hasn't actually managed to bend it enough to write it off totally.

Link to comment
https://www.sau.com.au/forums/topic/16075-busted/#findComment-329765
Share on other sites

Guest RaBZ3174

funkymonkey i agree with u that drifting in the wet is just plain dumb...but considering im only 18 i know how to drift and heal n toe...so not allll 18 n 19 year olds are shit****s like the one in the 32 :( oh yea and im definatley not dumb enuff to drift in a wet street hahahahaha wotta goose

Link to comment
https://www.sau.com.au/forums/topic/16075-busted/#findComment-329884
Share on other sites

aye... i used to drive a 170rwkw 180sx when i was 19... nuffin wrong with driving one... jus don't attempt shit when u dunno how to do it jus coz it looks cool in the videos. Learn first in a controlled environment. Or like attempt if if you know the skills to get out of tricky situations like Rabz. I'm 22 and I'm gettin a GTR, coz I know I can control it.

Its not about the age, its about the skills.

Anyways, my apologies viks i din mean 2 hav a go at ya, jus the foolio in the r32 tryin to drift streets

Link to comment
https://www.sau.com.au/forums/topic/16075-busted/#findComment-329989
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...