Jump to content
SAU Community

Recommended Posts

just go try repco, auto one, supercheap, etc.

im pretty sure the 32 gtr's are the same as a 33 gts-t, and i picked up mine from repco.

alternatively they can get them within the next week, got some ordered for kylie's stagea and recived them within a week (and they are weird/rare pads!)

dont bother with stock pads (or bendix, green stuff etc), if you are after decent performance when being hard driven - cos they are garbage IMO, more designed for someone who wants to think they got great pads but dont know better, they are also dusty as hell and fade quite easily once you start driving hard.

VisonR have a couple of different types of Endless pads in stock, around $240 (from memory) a set for SS-S, which will make you grin every time you touch the brakes. Excellent low dust street-light track work pad with great initial bite, 0-500deg C, aren't noisey when cold and wont destroy your rotors.

I agree with bendix but apart from teh fact the green stuf dissappears fast i thought they did well.

Think the pads u want for a 33t are "race brakes rb26's" yer i know 26 is just a coincidence. Perth brake parts are teh place for them.9451 9455

Who in Perth carries stock of brake pads for r32 gtr's ?

anybody know who coz looking at a few local websites they never specify what models they have the pads for

Hi Gary

The good news is that the pads for the non-Brembo GT-Rs are the same as those fitted to the S15 amnd many models of the WRX. Very easy to source.

If you want a set of excellent pads I have a set of "Pagid Blues" that I sourced from Perth Brake parts a while back. These are the "ducks nuts" and have done less than a 1,000 kms. Will really transform your braking!

Drop me a PM if you are interested.

Gav

i have organized a set of

SSS - Endless Brake Pads Type SSS (Front set)

Best Match Tyre: Radial tyre

Best Use: Street/Winding/Light Track

Material: Non Asbestos

Colour: Navy Blue

Co-Efficiency: 0.35~0.43

Rotor Temp: 0~500°C

they will do for now from vision R

i have organized a set of

SSS - Endless Brake Pads Type SSS (Front set)

Best Match Tyre: Radial tyre

Best Use: Street/Winding/Light Track

Material: Non Asbestos

Colour: Navy Blue

Co-Efficiency: 0.35~0.43

Rotor Temp: 0~500°C

they will do for now from vision R

That is a really low friction coefficient. You may need to get to the gym to work on your leg muscles. What are you using at the back?

Not sure what sort of road/track bias you are after but the Ferodo DS2500 takes a lot of beating. Friction coefficient is approx 0.5....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...