Jump to content
SAU Community

Recommended Posts

lol yea flashing greenish color. but in the manual it says that relates to error codes?!?!?!
my knock sensor doesnt read, but this is only on starting, will it only register once engine running?

It will only show actual real time knocking, so if it aint knocking it wont show.

and my water temp C NS_WT-1 reads about 70-80c, and when i switched the jumper it reads -16 or something, which is correct?

70-80 whilst running or stationary and cold? if it says 70-80 when cold then it is wired wrong.

  • Replies 765
  • Created
  • Last Reply

Top Posters In This Topic

I want to clear some things once and for all.

Some guys running EMU on sr20det experience some rich idle a/frs, fuel cuts.

Some guy on emanage forums, said that moving the jumper 8 from 1-2(default greddy) to 2-3 cured his problem.

Its the jumper for the ignition output signal. Greddy Default is 5v(jumper set to 1-2) and jumper set to 2-3 makes it 12v.

So can someone pls confirm: what configuration should rb20/rb25/rb25neo/rb26 guys run ?

Reading the EMU faq I thought rb2neo guys benefit from going to 12v ignition output signal.

Thanks in advance!

06.jpg

07.jpg

09.jpg

Edited by robots

^^^^^ sorry in my first post in this forum i mentioned that all cars should be run (jp 8 2-3 ) 12v.... sorry i did not mention it :ninja: i assumed you had already done that.

if you want more info see first post.

So I should set the jumper 8 to 2-3 and it will help you reckon ? ))) Haha. I feel kinda happy again ))

Thanks!

Yeah definately, jumper 8 set at 2-3 bypasses an ignition circuit inside the emanage.

Even though it is 5v / 12v jumper it cannot jump the 5v signal to 12v.... whatever voltage goes in can only ever come out the same voltage. The issue arises with some cars that have "dirty" signals, these signals are further modified by the 5v circuit and can play up causing misfires and so forth.

I set ALL emanage ultimates up at 2-3 (JP8) and work from there, i have NEVER had an ignitor failure in over 40-60 installs. (this info is based on a conversation i had with ichida-san who designed the EMU)

hey guys. just wanted to know what to set my knock sensor to.,

uras, or whover.

how do i set it up.

atm the jumper for it is set to 1-2. and in parameters im using the air intake temp/knock sensor 2 with it set to resonate and 7.02.

is this cool??

^^^^^^^ no one knows?

also i REALLY NEED a good tuner of a emu in the sunshine coast/brissie area.

can anyone recommend anyone, and how long and much will it be?

  • 2 weeks later...

Hi Guys,

My EMU was installed & tuned by a workshop, but the guy who did the work is away at the moment.

1st time I connected my laptop to the EMU, I spotted a huge error log. Any ideas?

my car is an R34 GTT (manual).

[2008/01/26-15:19:09]------------------------

65504:0443-0006[incorrect 3CH ignition input signal]

65505:0444-0003[incorrect 4CH ignition input signal]

65506:0445-0001[incorrect 5CH ignition input signal]

65507:0446-0002[incorrect 6CH ignition input signal]

65508:0441-0004[incorrect 1CH ignition input signal]

65509:0442-0005[incorrect 2CH ignition input signal]

65510:0443-0006[incorrect 3CH ignition input signal]

65511:0444-0003[incorrect 4CH ignition input signal]

65512:0445-0001[incorrect 5CH ignition input signal]

65513:0446-0002[incorrect 6CH ignition input signal]

65514:0441-0004[incorrect 1CH ignition input signal]

65515:0442-0005[incorrect 2CH ignition input signal]

65516:0443-0006[incorrect 3CH ignition input signal]

65517:0444-0003[incorrect 4CH ignition input signal]

65518:0445-0001[incorrect 5CH ignition input signal]

65519:0446-0002[incorrect 6CH ignition input signal]

I had a look at some of the wiring today (before I ran out of daylight)

The Ign Input Ch1, 2 and 3 looked to be wired correctly (according to the EMU wiring instructions)

I did find about 6 wires that weren't connected, but they didn't seem to be related to the ignition.

I look some photos so I could go back and double check... still scratching my head!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I thought it could be an issue because the standard plate was flexing when stressed. Maybe the original gear set will hold a bit better without flex? Last time on the dyno it made around 670nm at the hubs. Now it have bigger turbo and better intake but have not been on a dyno yet. The car is being used from family trips to drag race events. So the shifts can be a little violent. It is grinding if I shift to fast so was thinking I should overhaul it soon.
    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
×
×
  • Create New...