Jump to content
SAU Community

Recommended Posts

purchased a set of used sards and i would like to have them cleaned and flowtested before use. Can anyone recco somewhere in Bris or near to do the job.

I assume this is where this thread belongs at is definitely a local issue. :)

Link to comment
https://www.sau.com.au/forums/topic/161492-cleaning-injectors-in-brisbane/
Share on other sites

Injectors services SEQ = Click Here

Noel Noel Noel...

Why Sard???

You should have done a search about Sard vs Nismo injectors in the "forced" area...

New Sard injectors = worst money I ever spent...

I ended up selling them off to someone on ebay as they dont seal properlly and many others have had the same trouble even after purchasing a brand new "O ring" kit from Nissan (which I may add was $180). In short I bought a set of Nismo's and never looked back... :) They are more bucks but they work perfect and you will have no chance of leaking...

Injectors services SEQ

http://www.yellowpages.com.au/search/postC...e&stateId=4

Noel Noel Noel...

Why Sard???

You should have done a search about Sard vs Nismo injectors in the "forced" area...

New Sard injectors = worst money I ever spent...

I ended up selling them off to someone on ebay as they dont seal properlly and many others have had the same trouble even after purchasing a brand new "O ring" kit from Nissan (which I may add was $180). In short I bought a set of Nismo's and never looked back... :( They are more bucks but they work perfect and you will have no chance of leaking...

Shit col, At my age everything leaks so the injectors wont be anything new. :)

Nah Dave I sold mine 12 months ago...

Bought them for like $650 brand new and had to burn them at like $350 just to get rid of them as no one wanted them...

This was after buying a Nissan O ring kit too...

The Nismo ones were change from $900 brand new and were perfect...

Shit col, At my age everything leaks so the injectors wont be anything new. :P

LMAO!!!

Bad luck Noel, Can I suggest highflowed injectors.

i havent personally used it, but warwick has.

what you do is purchase them, and they send you highflowed injectors (550cc?????).

you then install them and send your ones back to them for cashback, so they can highflow yours for the next customer.

works out quite well i heard, maybe someone can shed more light onto it.

LMAO!!!

Bad luck Noel, Can I suggest highflowed injectors.

i havent personally used it, but warwick has.

what you do is purchase them, and they send you highflowed injectors (550cc?????).

you then install them and send your ones back to them for cashback, so they can highflow yours for the next customer.

works out quite well i heard, maybe someone can shed more light onto it.

I have hi flows, they seem to work fine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...