Jump to content
SAU Community

Recommended Posts

you might have two springs in your pressure regulating valve on the oil pump.

i've noticed in my oil pump that there are two springs in there one is the main spring which controls the pressure and the other one sits inside it and is alot stiffer and a bit shorter than the main one so when its cold or at high revs the main spring compresses and then hits the second stiff spring making the oil pressure skyrocket.

the gallery restictors will be contributing as well.

Cool then.... I'm good to go. I just put a adjustable valve on my oil inlet hoses to reduce the volume going into the turbos. I unhooked them while at idle and let them flow into a cup to measure the oil volume. It was quite abit still, even though I have the restrictors that come in the center section.

After a few spirited runs, it has taken care of the excessive oil flow through the BB turbos...

  • 1 year later...

Its been a little over a year now and she's still running strong.

I have to admitt a boo-boo I did, causing the oil problem I described in the beginning posts. I was having oil coming out the comp housings, and I discovered that I had hooked up a new oil catch can, but did not vent it.

I ran a -10 line from each valve cover to the can only, and the can was not vented.... Doh

So, once I discovered that little screw up, I opened up the catch can, and added a filtered vent and everything cleared up....

Just wanted to update this thread since I've been absent all this time.

Later - and thanks for the help!

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...