Jump to content
SAU Community

Recommended Posts

Hey,

i mentioned this to XRSIST on the cruise yesterday, how about we see about a group buy of them hand held UHF radio things? I think if we bought a box of em it would work out cheaper than buying them individually. What do you think about this idea?

Ryan

Link to comment
https://www.sau.com.au/forums/topic/1618-group-buy-of-uhf-radios/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

yea i was thinking them or perhaps even better ones, which if we bought bulk, we could get for the same price as the other ones. just depends how many people we got who want them i spose. I thought maybe we could

a) distrubute them at cruises by...

B) mailing them interstate to the state leaders to distrubute them to whoever ordered them

sound like a plan or..?

Well if we're going to get a discount it'll have to be on a decent one I guess. And ones that aren't on special, walking in a store and ask em the best price they can do on X number of units. Then somewhere else. Then buy em and just ship em out. The more we get the cheaper they'll be I guess. So if we can get everyone in nationwide interested then hopefully it'll work out cheaper.

I hope this doesn't throw a spanner in the works about which ones to get, but James (R32_gts4-t) found a really good one on the net that has all the features of the Uniden one and more, plus it comes with a earphone and boom mic that can be used via VOX.

And the good thing is that they are on special at the moment for $69 (down from $99), that price includes the earphone/boom mic.

I'll try and find the web page so you can have a look and see what you think.

Ever way james and I are getting one this week.

It was a lonely trip on the way home, and a handheld would have been great.

J

Found the pages.

Check them out.

This is the review page;

http://www.dansdata.com/digitalk.htm

And this is where they are on special for $69.

http://www.prestigecom.net.au

It's on the right handside in the specials thingy!!

Reading what they have there, I'm not sure now if the $69 includes the earphone/boom mic or not. Their wording is a bit wierd.

J

julian, a quote from the link above

"I haven't done detailed range tests with the Digitalk radios yet, but a one kilometre test, through various buildings and trees, worked fine without repeater assistance. Clear as a bell, no problem. Putting a solid hill in the way, though, dropped the range to only about 500 metres.

These little transceivers are specified as having an "up to five kilometre" range, and there's a good chance they'll actually manage that, in the absence of obstacles. In urban areas, a couple of kilometres is likely to be the outer limit, and any solid geographical features in between will massively reduce it.

In the absence of extreme terrain, five watt UHF CB transmitters can manage ranges up to 20 kilometres. If you're using a low power handheld, you'll be able to hear more powerful transmitters at quite long distances, just as I can hear the SYD01 repeater. But you won't be able to reply unless you get closer"

Guest | hype^ |

just stick with the 99$ uniban ones from tandy..

they're just a CB . we dont need it to be too fancy...

theyve got a decent range of 3km..

what more do i need?

btw whats the official cahnnel gonna be?

i was gonna suggest 33 but the R32 and R34 guy might not like that ..

if they go to 33 that is.. :lol:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...