Jump to content
SAU Community

Recommended Posts

Hey guys well i had this misfiring problem start along with idling problems when i changed my turbos,ecu, injectors etc about 8 months ago.

I figured it was to do with the tune or something so I had it brought back to the same workshop about 5 times and sometimes it improved a bit or even got worse at times but never totally disappeared.

I tried Racepace since everyone swears by Ben's work and had him diagnose the whole thing. Turns out the injector loom was falling apart and just by shaking it a bit whole cylinders would shut down. Had him make up a new one and a retune which left me with a hefty bill. Also, turns out that the MAP sensors were hooked up slightly wrong so I had him fix that too (i run a pfc djetro), which was probably to do with the tune not being able to be sorted out from the beginning.

It was running great for a week or 2 until a few days ago where it would just turn into a Scooby after about 15-20 mins of driving, no matter what rev range im in. Even happens on idle. I figured it was the plugs since they havent been changed since before Ben had a look at it and the tune was rather rich before so i reckon they might be fouled.

Today i took em out and chucked a set of NGK platinums in since my mechanic friend had a spare set lying around. It was gapped to 0.11mm and without checking we chucked em in and went for a test drive. It then was fine in the low rpms but would misfire high up. So we took em out, found out they were 0.11 and regapped em to 0.08mm. It then ran fine for like 20 minutes and i drove home.

Halfway through the journey it started again and wouldnt go away. Reached home and went for dinner and came back to start the car and it was fine again.

Also, i might add, with the old plugs which were cheap mismatched coppers (gapped to 0.08mm), I went to a track day and it would go great for like 5 laps and then it would start misfiring. I would let it cooldown for like an hour or so and start it up and it would go good for another 5 laps then happen again.

What does that point to? Im running roughly 315rwkw btw.

I have had a read of all the misfiring threads on SAU and ive come up with several possible conclusions:

1. Unsuitable heat rating? Thus the misfiring only happening after a certain period of driving?

2. Cracked coilpacks? Even if i dont see any hairline cracks can i just wrap everything up in electrical tape?

3. Need a smaller gap since running considerably more power than stock and maybe not enough spark?

4. Coilpacks leads loose? thus leading to misfiring throughout the whole rev range no matter what i do?

This is really a pain in the neck and its one of the remaining problems in my car that I just havent been able to iron out even after having so many people look at it. Someone please help, i cant seem to get it to run reliably and smoothly even after having spent a ton. Argh :)

Edited by Yawn

check coil packs for hairline cracks, you dont need to tape them if their isnt any . you obvioulsy need a lower gap considering your running that much power.also weather is changing , might want to check up on heat rating

Edited by sky-017
check coil packs for hairline cracks, you dont need to tape them if their isnt any . you obvioulsy need a lower gap considering your running that much power.

Hmm, how much lower? 0.06mm lowest? Im just wondering if it was such as obvious thing to do why no mechanics thought of regapping the plugs when they had a look at my car?

Would taping the coilpacks up work as sort of a preventive measure to future hairline cracks?

Thanks for the input

Update on this, took the car out for a spin. Didnt happen this time after about 20 minutes of driving at normal operating temperature.

How does this happen on the highway at normal operating temperature (ie. earlier on in the day) but not now?

The oil/water temperature between the two times out were exactly the same. But it seems the longer i drive it the more likely it will happen. The thing is, it never happens on cold start or within the first 10 minutes of driving throughout the whole 8 months so it is likely to be temperature related im guessing, maybe the temperature of the spark plugs themselves after working for a while?

To elaborate on when it happened on the highway, I was just cruising at 100 in 5th gear with a constant throttle application and out of nowhere it started. Its doing my head in!! :)

Hi, I had the same thing (15 minutes starts missing) Over about 2 months I changed most things, turned out to be the POWER TRANSISTOR (coil pack igniter) I opened the back (with side cutters) of the P.T and found one of the input fine wires had come adrift. It was like a bimetal strip (broke contact when hot) I cleared away the goo and soldered the wire. WORKS PERFECT

Another quick check for coil casing issues is to remove your coil cover, go for a drive when it is dark to warm everything up, then pop the bonnet and look around the base of the coils whilst the engine is running and everything is dark.

Even at idle I could see blue arcs around 4 of my coils.

If nothing then follow gillies2001 advice and try a replacement ignitor pack.

Just something to try.

James.

ps. also make sure you have a good earth to the ignitor pack. The original earth can get a bit dodgy and play up.

Edited by heller44

I've got the very same problem but with an ECR33, the car runs great in the first say 15-20 mins of driving, then starts to misfire more and more the longer i drive. The misfiring seems to occure above 4-4500 rpm.

Went for a 3+3 hour drive yesterday (3hours in the morning going to an event, 3 hours returning home). The last tries to reach above 4000 rpm resulted in a very fast, constant misfiring.

mate check out your coil[packs for hairline fractures, veyr easy job, and look for snapped or burnt out probes. also look for evidence of (white chalkiness) type powder or staining as this often leads to coil pack breakdown. take the valley cover off for starters to let the hot air out and see how you go, if it still happens have a look at the coil packs!

splitfires are a great upgrade mate and relatively cheap these days, check all your plugs for gap, if you dont have feeler gauges, a hacksaw blade is .8mm if the slides in and out of the gap easily, buy some iridiums and re-gap them to atleast .8mm.

any problems or further help, pm me mate!

cheers and goodluck, Garth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
×
×
  • Create New...