Jump to content
SAU Community

Recommended Posts

Came across the Circuit Club web site the other day and noticed they were having a track day on ANZAC Day coming up. Anyone have any experience with these guys or their events?

http://wp.circuitclub.com.au/?page_id=3

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

I haven't actually been to a circuit car club day yet, but I've heard nothing but good things about them from people on SAU and quite a few of the NSCC guys attend these days aswell. So I figured they must be a good thing!

I believe that they'll also have driving instructors on hand to give tips etc.

I've already booked in for the ANZAC day track day, it's shaping up to be a good one! You should come along!!!!

Liz.

All the trackdays i usually go to are with circuit club, can't be pleased more with there trackdays

-Timing is included (free of charge)

-Cars are split into groups A B C D usually 10-15 cars per group so the track isn't overloaded with cars at one time

-Lockup Garages(Use to be provided at wakefield but ithink this is no longer available since the new owners of wakefield park) - free of charge

They usually have a few guys that can show you the lines and braking points for beginners.

Prizes to the fastest guys of the day

Also their days are usually on weekends or public holidays if you intend on going book 3-4weeks in advanced because by the last 2 weeks they are usually sold out.

If you go with these guys you won't be disappointed, been around for YEARS a very well organised group.

I have been to one of their track days at Wakefield. Well organised event, plenty of track time, official timing included and a pretty friendly group of people. The day I was there, there was a good range of different cars such as Intergras, WRX's, a few Skylines and 200's, even a Ferrari and a kit car.

I would definately go again.

Liz.. last time i went to wakefield after my turbo upgrade..

i ONLY got 2 LAPS per session!!!.. stupid car was overheating.. hitting close to 120degrees after 1 warmup and 2 hard laps..

i NEED A OIL COOLER before i head down :D but i'm so tempted to put the funds towards camshafts for more power ahaha

previously at least i got 3 hard laps with my old turbo which is alright.. so i'm out for the meantime..

I've done a lot of Circuit Club days.

I quite like them. They have instructors on hand (in case you need it, and depending on your insurer you can say its driver training and so probably be covered under insurance), and most of the attendees are sensible. You get the occasional hero (like the idiots driving the Accord Euros at EC earlier this year in the "novice" session that decided to try passing people around the outside of Turn 1) but generally people are well behaved.

I should be at the next EC day.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...