Jump to content
SAU Community

Recommended Posts

Guest Joeyz

Hi all, hope someone might be able to shed some light on this strange situation.

My engin light has been flickering on and of latley and only have noticed it when i am in 4th or 5th gear. Just cruising around and if i were to put my foot down to speed up it flickers.

Under hard acceleration through 1st to 5th gear it does not come on.

Has anbody had the same thing happen or can i get a few tip's on what to do?

Thanks in advanced.

post-35974-1176114434.jpg

Link to comment
https://www.sau.com.au/forums/topic/163821-r34-gtt-engin-light/
Share on other sites

the check engine light will come on to indicate knocking/pinging...its not good. The factory warning is set to come on at 60, which is pretty high...tuners like to keep it under 20 when tuning aftermarket ECU's

If its only happening in 4th or fifth gear, I'd say you're in the wrong gear to be accelerating that hard at the time, and putting too much load on the engine. if you were to drop back to 3rd and accelerate that hard, chances are you wouldn't get the knocking as it sounds like your car is fine the rest of the time....

Have you got an after market ECU and a tune? or still on the stock ECU?

Either way, its not good, so I wouldn't keep doing what you're doing...take it somewhere and get it checked out :stupid:

Guest Joeyz

I'v only had the car about 6 weeks and know that it has a APEXi Power FC.

You said that the car might be knocking, I can't hear any noises like that. I used to be a mechanic about 4 years ago and i'v heard what that should sound like and i can't?

I never worked on car's like this before or up untill i bought it.

I do have planed to take it to a dyno and get it tunned fairly soon though.

I'v only had the car about 6 weeks and know that it has a APEXi Power FC.

You said that the car might be knocking, I can't hear any noises like that. I used to be a mechanic about 4 years ago and i'v heard what that should sound like and i can't?

I never worked on car's like this before or up untill i bought it.

I do have planed to take it to a dyno and get it tunned fairly soon though.

you don't have the pfc hand controller do you? umm I seriously think there's a flaw in 34s pfc....I've heard ppls pfc sorta "detune itself" every few months, initially knocking at 5th then move down to 4th ..etc..

agree - definately knock

note ur load speed revs and gear to help the tuner out

i'd also consider in investing in the handcontroller (while they're still available)

feedback info on display very usefull (such as knock and water temp)

goodluck with it

Guest Joeyz
you don't have the pfc hand controller do you? umm I seriously think there's a flaw in 34s pfc....I've heard ppls pfc sorta "detune itself" every few months, initially knocking at 5th then move down to 4th ..etc..

Nah don't have one. Looks as though the previous owner didn't have one or sell it with the car. When you say hand controller is it conected to the PFC or not? Never seen one.

I suppose E-Bay or buy one brand new for the car?

I noticed this problem myself, except my engine light flashes very rapidly at the end of 1st and sometimes 2nd. Only saw it happen once or twice though, apparently the owner who I bought it off said his car would knock alot too. Is this a common R34 problem or could it be something on my end? As in the unit itself or the actual knock sensor?

Guest Joeyz

Hi all!

Thanks to all that replied about the engin light.

I was able to get my car dyno tuned today by Castle Hill Exhaust and he brought back the timming a bit so the light would not come on. All is good now! Yeah!

My car started at 178kw and the final outcome of the tune was 199.9kw at the rear wheels. Very Pleased.

Thanks again :P

post-35974-1176535432.jpg

Hi all!

Thanks to all that replied about the engin light.

I was able to get my car dyno tuned today by Castle Hill Exhaust and he brought back the timming a bit so the light would not come on. All is good now! Yeah!

My car started at 178kw and the final outcome of the tune was 199.9kw at the rear wheels. Very Pleased.

Thanks again :P

What sort of work has been done to the car to acheive those figures?

Hey mate...I wouldn't be running 15psi through the stock turbo...unless you want it to fail and have to replace it.....generally the safe limit for them is about 12psi...you might find you'll make more power on lower boost too....I make 200-205rwkw with the same mods on an R33 at 12psi...

Guest Joeyz
What sort of work has been done to the car to acheive those figures?

It has a front mount intercooler, 3inch exhaust all the way through, Apexi power FC computer, K & N Air filter, HKS Blow off valve.

When dyno'd on saturday, it was running at 1 bar and now it has been adjusted to 15psi.

Guest Joeyz
Hey mate...I wouldn't be running 15psi through the stock turbo...unless you want it to fail and have to replace it.....generally the safe limit for them is about 12psi...you might find you'll make more power on lower boost too....I make 200-205rwkw with the same mods on an R33 at 12psi...

I don't understand how i will make around the same power running less boost :thumbsup: can you tell me how that is?

I still am learning a lot about the car, only had it 6weeks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...