Jump to content
SAU Community

Recommended Posts

Hi,

I'm currently looking to buy an R34 GTR and I'm just wondering what the differences are between a non-vspec, a vspec I and a vspec II. I've had a bit of a search around the site and the net and haven't been able to find this information. The only thing i've picked up so far is that v-specs have better suspension. Any feedback would be much appreciated.

Cheers

Ashley

Link to comment
https://www.sau.com.au/forums/topic/164043-differences-in-r34-gtr-versions/
Share on other sites

There is not a whole lot different between the V-spec/V-spec2's and non V-spec. V-spec's were made from 1999- October(ish) 2000 then V-spec 2's were released until production was ended in 2002. V-spec/V-spec 2's have a viscous LSD as opposed to mechanical. V-spec/Vspec 2's have harder suspension and underbody air diffusers front and rear. They also have intake and exhaust temperature displayed on the dash screen. There is no real difference between V-spec and V-spec 2 except for a bonnet vent on the v-spec 2. V-spec 2 was released to coincide with a minor facelift given to all GTR's from October 2000 on. The facelift included: black interior instead of grey, clear indicators, stainless steel pedals, larger rear brakes and a few different paint colours.

My father is currently selling his GTR - http://www.carsales.com.au/used-cars/priva...|1&trecs=21

There is no real difference between V-spec and V-spec 2 except for a bonnet vent on the v-spec 2. V-spec 2 was released to coincide with a minor facelift given to all GTR's from October 2000 on. The facelift included: black interior instead of grey, clear indicators, stainless steel pedals, larger rear brakes and a few different paint colours.

V-Spec II bonnet is carbon fibre with the NACA duct. V-Spec, and M-Spec bonnet is aluminium.

Series II BNR34 pedals are aluminium on rubber not stainless steel.

There are more differences as well regarding a couple of cost cutting decisions Nissan made when it came time for the series II BNR34. For example they deleted the rear wiper plastic under-cover in the series II, the radiator end tanks are plastic in the series II as well.

These kind of things are in keeping with Nissan's usual strategy of doing things cheaper later in a models lifecycle to fit improvements in such as the carbon fibre bonnet and slightly different rear rotors.

Also the V-Spec II suspension is stiffer than the V-Spec and M-Spec suspension. The M-Spec having probably the best suspension for street out of all the GTR's.

M-Spec also obviously has the exclusive colors and the leather interior making it overall the best pick of the bunch. Unforuntately for us it also commands a huge premium at auction in Japan . Usually over the 4.5million yen mark.

The best value if you're after a GTR is a V-Spec. The standard GTR's lack the agressive look of the V-Spec since they lack the second front lip. The missing rear diffuser kinda sucks too as they look much tougher from behind with it.

V-Spec II would be the next best in terms of value. You get a newer car but you pay a decent amount more for the privilege.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
    • Mine is all -12, I’m running a dry sump in a billet block though 
    • HG's high flow is not "bolt on". The core is shorter, moves the comp cover rearwards in the engine bay. means you have to deal with the inlet plumbing a little bit. This is probably something to consider with every "bolt on" turbo anyway.
×
×
  • Create New...