Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

wtf amber, u goose, u were the 1 that was havin a minor heartattack over goin to the drivins...now ya goin

CHOP: last time we went we didnt c 2fast2furious...or the first 1, and the dandy drags which r 2km down the rd werent happening like they r now, and the millions of dollars the cops r spendin on tmu at the o wasnt happeneing either...i for 1 will not go to the drive ins, for a few weeks at least (2 c this movie)

goldclass is the go, if its only 20-30 thats mad, we can get that many easy...

the 14th

if u r dead serious about goin to gold class on saturday the 14th to c 2f2f, pm me, and if we get the right numbers i will make a post on exactly wots happening...

cheers

jet

OK I'm starting a new thread...

Everyone feel free to go to Gold Class with JET, but we're gonna go drive ins on sat 21st june.. by then cops would have died down and the atmosphere will be great with us all lined up watching the movie

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...