Jump to content
SAU Community

Recommended Posts

COME GET IT, FIRST IN FIRST SERVED

i have the shell of a r32 front cut left over from a conversion i need removed from my property.. if somebody comes and takes it away, i'll give them all my left overs from my conversion, some stuff has been sold separately, so pretty much what i mention here is all that's left:

* dash in good condition (with vents in perfect condition)

* a/c pump

* brake booster/master cyl

* stock air box

* stock intercooler + some piping/hoses

* steering wheel (usable, but visibly poor condition from having other front cuts stacked on it)

* steering column with levers, ignition barrel and keys

* a/c blower fan (still mounted in the front cut)

* radiator clutch fan

* box of leftovers including some interior pieces that might be useful to somebody

-> (cluster surround/gearboot/console surround SOLD already)

* full E36 BMW exhaust (with chrome tip!!!)

Not interested in separating parts, just come with your trailer ready to take everything :)

The front cut had 87,000kms on it, so most parts are good condition.. you'll need a box trailer to take away the front cut.

Also, trying to SELL a speedo (blue dials, with the abovementioned 87kms on it) for $80 (OR, make an offer).

thanks, CHRIS>0422933217.

Link to comment
https://www.sau.com.au/forums/topic/164217-r32-free-stuff-come-get-it/
Share on other sites

Looks like somebody is coming up from gold coast to grab this stuff.. he said he'll pickup tomorrow (thanks Dion), but i'll advise in this thread if it falls through.

.:chris:.



  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...