Jump to content
SAU Community

Recommended Posts

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

for humour

ecu $1500 tuned

turbos $3000 fitted

tyres $1000

clutch $1200

strip interior $1000

no exhaust $1000

fuel upgrade $1000

cold air / intake setup $500

nos kit $600

4wd upgrade $800

afm upgrade $800

4wd controller $350

it will fail on stock internals

ECU, big turbo/s, NOS kit, clutch and some injectors less than 5k = stolen hardware or not possible

the ecu alone is $1000 untuned

big turbos $3000 a pair

nos kit is $600 ish

clutch is $1200

Turbos 2860-5 - $2500

ECU - $1000

Injectors - $700

AFM - $600

Fuel pump - $200

Exhaust - $700

Clutch - $1200

6900. Thats not including anything else you'll need to replace along the way.

Or the tyres you need to race on

For 5k, i say it cant be done. Even if you used 2nd hand parts. Its still out of reach

You dont need NOS to run a 10.99

ECU, big turbo/s, NOS kit, clutch and some injectors less than 5k = stolen hardware or not possible

the ecu alone is $1000 untuned

big turbos $3000 a pair

nos kit is $600 ish

clutch is $1200

hmm, maybe if you buy all ur products brand new....

you can get a good set of second hand HKS GT2530 for under 2k (dont know if they will be big enough), that price inc of shipping and buyers fee (buying from yahoo auctions)....

but having said that, i personal don't think it can be done even with second hand parts...

Twin Turbos $2000-$2500 (or $3000-$3500 for second hand hks t51r or similar turbo kit)

then you have ecu (min $900 for pfc + $300 to $500 for tuning = 1.5k)

maybe smash in a FPR turn up the pressure as much as you can and hope the stock clutch holds up LOL!

yes ok, i forgot about the fuel.

but assuming you scored the gear cheap secondhand, chinese turbos no intake filtration etc, dodgy hack togeather plumbing, decent wet nos can had for under $400 second hand yeah? surely a clutch to hold it could be had for 1k ay? and all this only has to hold togeather for a short time... how many kw is needed to get in to 10`s?

hmm, maybe if you buy all ur products brand new....

you can get a good set of second hand HKS GT2530 for under 2k (dont know if they will be big enough), that price inc of shipping and buyers fee (buying from yahoo auctions)....

but having said that, i personal don't think it can be done even with second hand parts...

Twin Turbos $2000-$2500 (or $3000-$3500 for second hand hks t51r or similar turbo kit)

then you have ecu (min $900 for pfc + $300 to $500 for tuning = 1.5k)

maybe smash in a FPR turn up the pressure as much as you can and hold the stock clutch holds up LOL!

a pair of 2530s with

stock fuel rail

stock injectors

stock pump

stock clutch

wont even pass tuning, it will lean out off the planet and go boom

a pair of 2530s with

stock fuel rail

stock injectors

stock pump

stock clutch

wont even pass tuning, it will lean out off the planet and go boom

rofl he never said it was ment to last :)

ps i know its not possible im just throwing wild ideas up in the air LOL! how much pressure can the stock fuel line hold?

sure it would be fun to try but it wont happen

and an xr6t i dont think could get into 10s under 5k

they apss kits to get 10sec are like 20k

im pretty sure i saw a stock turbo'd xr6t do a 10second pass (article on autospeed i think). 20K is over the top, if you put it together yourself you could do it under 10K easy.

why has everyone gone for twins on a 'cheap' drag setup ?

go for a big single (garrett off the shelf). injectors, map sensor PFC, clutch, exhaust and ALOT of nos. i rekon you MIGHT just scrape in under 5K, with some second hand parts :)

im pretty sure i saw a stock turbo'd xr6t do a 10second pass (article on autospeed i think). 20K is over the top, if you put it together yourself you could do it under 10K easy.

why has everyone gone for twins on a 'cheap' drag setup ?

go for a big single (garrett off the shelf). injectors, map sensor PFC, clutch, exhaust and ALOT of nos. i rekon you MIGHT just scrape in under 5K, with some second hand parts :)

exactly, and forget the xr6t, the cars that go into the 10`s have alot of money spent... but still on the stock gt3540 with ported wastegate mind you...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...