Jump to content
SAU Community

Recommended Posts

hey guys,

I'm just wondering who with r34s on here have experienced bad coils? I've searched around and found problems with a missfire in the 4000 to 4500rpm on turbo cars but what do NA symptoms have? how can u tell its a coil and not a plug without physically inspecting it? reason I ask is mine is running like a dog (sounds like a WRX) and there is a lot of stuff to unplug to get to the cam valley to check.

so any help on what the symptoms are would be great I suspect its a coil but need some reassurance.

thanks

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/
Share on other sites

NA's with bad coils experience the same problems as their turbo counterparts. My last car was a ca18de and i went through about 12 coils on it. Car feels like it's missing a cylinder and sounds like a wrx but without any pull. There's a few threads on coil maintenance and cleaning, check them out.

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3056087
Share on other sites

Also can anyone tell me it is a coil from my symptoms?

Cold start is fine will drive around OK for a long time or short time its totally random. Engine light comes on car sounds like a WRX has poor accelertation etc. But when it is driving OK it does have a miss as well?

Any help would be great

Cheers

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3056886
Share on other sites

Cold start is fine will drive around OK for a long time or short time its totally random.

Engine light comes on car sounds like a WRX has poor accelertation etc. But when it is driving OK it does have a miss as well?

Generally speaking, nissan coils generally get worse when they're hot. On my previous car, when the coils were bad they would generally be okay for about 30 minutes then it would sputter and the engine light would flicker as you say.

How many kms has your car done? has it ever had the coils replaced? I would definately give it a good clean, take out the carbon deposits on the tip perhaps give it a light sanding, silicone the boots and clean the leads. Come back and tell us if that helps solves your problem.

Investigate the possibility of going to splitfire replacement coils... I wish I had known about them earlier, that would've saved me going through a dozen coil packs.

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3056997
Share on other sites

Thanks again Howie will give that ago. Car has done 60,000k's Can they go around there? I have heard R34's are notorious for coil failure.

My first set went at 68,000kms on my last car.

It's not just R34 notorious for coil failure, it's basically any nissan car pre-2001 that uses the coil pack system. CA/SR/RB's.

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3057103
Share on other sites

ive had my r34 for 7 months and had 3 coils go on me. in the end i replaced all of them with splitfires. its too costly too continue to replace each coil as they go. my r34 n/a has done 67,000. the last 2 times i lost the coils the car would be running on all 6 cyclinders, then lose a cylinder then gain it back etc. those two coils where showing a greater heat resistance to the others. hope this helps!

Link to comment
https://www.sau.com.au/forums/topic/164961-bad-coils/#findComment-3057915
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...