Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Yes, they are parallel imports, and production date is 04. They should have a 3 yr life on the rubber, which is why he is selling them at reduced prices

According to the Toyo website, the tyres are only good for 12 months and they specifically warn about buying parallel imports.

The "shelf-life" of the "GGG" and "SG" tread compounds is considerably shorter

compared to the compounds imported by Toyo Tyre & Rubber Australia Limited. The

majority of the parallel import Proxes R888 tyres in "GGG" & "SG" tread compounds were

produced in 2004. Performance of the "GGG" & "SG" compounds will not be as the

manufacturer intended where tyres are more than 12 months old. This is one reason why

Toyo Tyre & Rubber Australia Limited keeps very limited stocks of Proxes R888 "GGG"

tyres.

Perhaps the price should be a bit better considering the reduced performance?

picked up 2 of the r888 in 16's extremly soft tyre compound. mate u wana bust the price down. i think less then 150 for any semi slick is a deccent price, pretty much similar price for a normal road tyre in 225 40 16. taleb's was very helpfull also.

  • 2 weeks later...
  • 1 month later...
  • 3 weeks later...

Hi there Im also interested in a set of 255/40/17's. Im pretty sure the 235/45/17 would be a bit narrow on 17x9.5 rims??

Cheers Andrew

OK here's a list of people interested so far for 235 40 17's and 255 40 17's:

Trust33

Forged

Betz

woolls

padey

r33-d-rift

Adriano

kyle785

Price will be found out as soon as possible.

  • 3 weeks later...
  • 7 months later...
Guest
This topic is now closed to further replies.



  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...