Jump to content
SAU Community

Recommended Posts

if its S1 R33 i think it would be the same as the R32s and its 0.6-0.9 Ohms.

and also check for cracks in them

ended up bein cracks in em, car runnin great at 13psi now. thanks for the help!

cheers

Hey guys another missfire problem.

I have a S2 Gts-t was told by two different shops that it wasn't coils and also had a new cas put in which fixed nothing i had the ecu gone over and everything was fine i had new plugs put in and had the mechanic look over afr, is there anything i can do to try and fix this problem. Cheers

Interested in what you did to resolve this issue?

simple fix, just pull the coil packs off and wrap some flame resistent electrical tape from the plates at the top down to the rubber that clicks onto the top of your plug. it will make sence wen you pull them off. obviestly this is a quick fix. new coils are the textbook way to rectify the problem....

hope that helps.

brett

Interested in what you did to resolve this issue?

simple fix, just pull the coil packs off and wrap some flame resistent electrical tape from the plates at the top down to the rubber that clicks onto the top of your plug. it will make sence wen you pull them off. obviestly this is a quick fix. new coils are the textbook way to rectify the problem....

hope that helps.

brett

simple fix, just pull the coil packs off and wrap some flame resistent electrical tape from the plates at the top down to the rubber that clicks onto the top of your plug. it will make sence wen you pull them off. obviestly this is a quick fix. new coils are the textbook way to rectify the problem....

hope that helps.

brett

hi guys does anyone have any pics of how you tapped the coil packs i tried searching but no luck,thanks.

Hey guys another missfire problem.

I have a S2 Gts-t was told by two different shops that it wasn't coils and also had a new cas put in which fixed nothing i had the ecu gone over and everything was fine i had new plugs put in and had the mechanic look over afr, is there anything i can do to try and fix this problem. Cheers

what boost? could be hitting fuel cut but im guessing you have allready thought of that... check the coils yourself, cracks are barely noticeable and will not show that they are stuffed wen doing a resistance test on them. if you pull em off you will see a series of plates, cracks occor in the plastic just below that, its caused by heat under that valley cover that comes on the 20's and 25's from the factory....

worth a try before spending much loved coin trying to diagnose the prob!

hope it helps

cheers

hi guys does anyone have any pics of how you tapped the coil packs i tried searching but no luck,thanks.

its pretty easy mate, if you pull 1 off you will see, its just got a series of plates and a plastic box (kinda) underneath. whem lookin at mine the hairline cracks were in the plastic bit. doesnt really matter where you tape up, as long as you can get em back on and bolted down. its really just a quick fix to find out if you need new coil packs!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If we're going after market gauges, I'm a big fan of Australian made... Get some RedArc!
    • Unless you're fortunate enough to buy a newer car, getting an older style plate to match your name/car is difficult because they've already been purchased.  Unlike other countries, personalised plates are locked to the country and not region, so there can't be multiple versions of the same plate but with a different area code.  Hope that helps
    • People use the numbers to make it look like letters to spell words/names, which is where the illegal spacing comes in. For example this GR Yaris  
    • Today's rock removal from my stock pile out the back into a 4m³ skip bin, I still have a bit to go, hopefully there's enough room in the skip bin, it will be close My daughter and her boy was coming on Sunday to help, but, I got possessed by demons and started work as soon as the bin arrived at 1230 today Lots and lots of barrow loads were achieved  Currently I'm sitting on the lounge drinking beer thinking of how I should have waited till Sunday for some help, tomorrow will be a day off, in saying this, my day off will involve prep and paint of my alloy coolant and PS tanks with wrinkle paint (Jackie is in Sydney till Sunday so the home oven will get a run curing the paint....LOL)
    • That's why I said it is a meaningless term. Because there is more than one meaning that people can apply to it. When we said "highflow", that is exactly what we mean, and exactly what is done. In a highflow, they take your housing and machine them out to take bigger wheels, have a better internal profile, etc etc, and fit a new core with the different/better/bigger wheels.
×
×
  • Create New...