Jump to content
SAU Community

Money To Spend On A 32 Gtr

Angus Smart

By Angus Smart,
in Engines & Forced Induction

 Share

Recommended Posts

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

frankxinyu Mentor

frankxinyu

Posted
Posted
FTR my R32 GTR produced 300rwKW recently

Standard Internals

Standard Injectors

Standard Fuel Pump

Standard AFMs

Standard Cams

7500rpm Rev limit

Garrett GT2560r Turbos

Trust / Greddy Front and Dump pipes

Jasma 3" Exhaust

PFC with PFC Boost control

Runs High 11's @ around 190kmh

Car produce's the numbers at the dyno and the track, but dont get to excited as does not feel that fast in day to day driving.

Linear power delivery (almost straight line on dyno graph) plus 4WD grip makes it all feel kinda...Meh!

thats pretty good actually

standard injectors, stock pump, stock AFMs, and stock engine running 11s.

i heard those Trust front/dump pipes work really well.

700HP-GTR33 Mentor

700HP-GTR33

Posted
Posted
He said rebuild the RB26, not the parts on it... Any car needs parts to make power.

Rebuilding an RB26 requires attention to detail (read:cost)

Sorry...you use the same part again.....keep everything the same...just stick back everything that is broken...lol

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Well if you were using stock parts would more than likely would be needing a rebuild, being a stock GTR is pretty reliable.

So someone thats busted a motor probably already has turbos and fruit on there.

They have chased power, and gone beyond the limit

PSI_GTSII Experienced

PSI_GTSII

Posted
Posted
Your pass at 190km's an hour is more to me like a low 12 second car......what is your 60f time....?

What type turbo is it?

Well like I said its a high 11 car.......it ran a 11.9 with a 1.794 60ft, and last time I checked that makes it an 11 second car :(

When I bought the Turbos they were called Garrett 2560r, it is equivilent to the GT-SS, N1's etc

For the sum of my cars parts it performs quite well, and goes to show you can achieve a 300rwKW goal reletively cheap and easily.

This however is the point of diminishing returns....to go a little bit faster now is going to cost a lot more money :rolleyes:

padey Community Regular

padey

Posted
Posted
FTR my R32 GTR produced 300rwKW recently

Standard Internals

Standard Injectors

Standard Fuel Pump

Standard AFMs

Standard Cams

7500rpm Rev limit

Garrett GT2560r Turbos

Trust / Greddy Front and Dump pipes

Jasma 3" Exhaust

PFC with PFC Boost control

Runs High 11's @ around 190kmh

Car produce's the numbers at the dyno and the track, but dont get to excited as does not feel that fast in day to day driving.

Linear power delivery (almost straight line on dyno graph) plus 4WD grip makes it all feel kinda...Meh!

I basically have the same setup, the difference being standard ECU and 2860-7 turbos.

Running 18psi i get 240awkw, and the injectors and AFM are at 95%. So i'm wondering will the different turbo and PFC make that much of a difference???

thanks

700HP-GTR33 Mentor

700HP-GTR33

Posted
Posted
are u sure its the 2560?

Sounds like youve got the 2860R-7s :rofl:

+1

Sound like you have the groupA(Garrett-7) (N1)type......

Great time....1.78 odd 60f.......190km.....11.9 second.

My car passes the line at 200km.......1.7 odd 60f....12.3 seconds...drag meet times.

Must have a great kick in 2nd gear.....what tyres have you got?

Was this a race type meeting were you were up against others ...or was like how most manufactures give the times for the car.......

IE Not taking re-action times on launch.

700HP-GTR33 Mentor

700HP-GTR33

Posted
Posted
Well if you were using stock parts would more than likely would be needing a rebuild, being a stock GTR is pretty reliable.

So someone thats busted a motor probably already has turbos and fruit on there.

They have chased power, and gone beyond the limit

Yes and NO...

Some just have boost controllers and dial up higher settings......or thrash their cars when they are cold.

I have heard of some melting Pistons because tuners have not noticed spark plugs being burnt.This is due to lower fuel levels being delivered to

the chamber,correction is quite easy...increase fuel on that injector...etc..etc..etc.

Some fail due to the fuel pump going at high revs.

Some just unlucky too...cam gears....bolts on cam gears or timing belts breaking......

Some failures have been caused by oil pumps on most RB motors...such a bad design..as I have stated before.

But the worst one I have heard was a oil relocation filter being blocked.

All motors can blow without the correct...safety and tuner settings and not just the people who chase power and have all the right stuff fitted.

hanyou Grand Master

hanyou

Posted
Posted
+1

Sound like you have the groupA(Garrett-7) (N1)type......

Great time....1.78 odd 60f.......190km.....11.9 second.

My car passes the line at 200km.......1.7 odd 60f....12.3 seconds...drag meet times.

Must have a great kick in 2nd gear.....what tyres have you got?

Was this a race type meeting were you were up against others ...or was like how most manufactures give the times for the car.......

IE Not taking re-action times on launch.

ive got hi flows though and i run a 12.3 with a 1.7 60ft at about 108mph? i think thats about 175km

and my hiflows are very laggy as i have no engine management other then a mines ecu

Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted
+1

Sound like you have the groupA(Garrett-7) (N1)type......

Great time....1.78 odd 60f.......190km.....11.9 second.

My car passes the line at 200km.......1.7 odd 60f....12.3 seconds...drag meet times.

Must have a great kick in 2nd gear.....what tyres have you got?

Was this a race type meeting were you were up against others ...or was like how most manufactures give the times for the car.......

IE Not taking re-action times on launch.

i get 11.4 @ 195kmh with a 1.6-1.7 60ft

PSI_GTSII Experienced

PSI_GTSII

Posted
Posted
+1

Sound like you have the groupA(Garrett-7) (N1)type......

Great time....1.78 odd 60f.......190km.....11.9 second.

My car passes the line at 200km.......1.7 odd 60f....12.3 seconds...drag meet times.

Must have a great kick in 2nd gear.....what tyres have you got?

Was this a race type meeting were you were up against others ...or was like how most manufactures give the times for the car.......

IE Not taking re-action times on launch.

I have taken this GTR to the drags on 3 seperate occasions, i'm not into drag racing just like to get a time after I have made a modifaction.

1st time out in car when it had 315rwHP it ran 3 x 12.6's at 180kmh 2.1 60ft

2nd time out with same HP but Button Clutch resulted in a 12.4 @ 178kmh 1.9 60ft

3rd time out with power increased to 400rwHP I did one pass only which was an 11.9, I looked at the timesheet and figured I was'nt going to beat my 1.7 60ft from that run, and the rest of the run was pretty flawless, so was'nt going to go any faster, had got my 11 second pass, so went home :rofl:

ive got hi flows though and i run a 12.3 with a 1.7 60ft at about 108mph?

You have less HP than me.

i get 11.4 @ 195kmh with a 1.6-1.7 60ft

You have more :mellow:

Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

i'm running a048's hit the limiter for launch, probably bounce for a bit and wait for rev to drop and pick up again then go for second. the the rest is pretty simple. i am sure i could improve on my 60ft with a tamer launch and a shorter shift to second. without hitting the limiter so much. but it does sound good haha

SLIPPERY Experienced

SLIPPERY

Posted
Posted
I basically have the same setup, the difference being standard ECU and 2860-7 turbos.

Running 18psi i get 240awkw, and the injectors and AFM are at 95%. So i'm wondering will the different turbo and PFC make that much of a difference???

thanks

Hell yeah, try around 60rwkw with a tuned FC and retaining injectors and AFMs

Injectors are near maxed at 240rwkw cause of the stupidly rich stock ecu

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...