Jump to content
SAU Community

Recommended Posts

Someone here posted that it is basically the same and uses the same piping but it's just thicker. If thats true then it would be a reasonable upgrade for someone like me who is only planning on running about 12psi max with the basic sort of mods to get around 200rwkw. So for the couple hundred? or so it is much cheaper than a fmic as i wont be running a bigger turbo so i wont need one. So it would provide that bit extra cooling without going overboard on a fmic. If someone could confirm that its a straight swap that would be great, also does anyone have a rough price for a second hand one?

the stock r33 unit hasn't prevented me from getting as much power as the factory turbo can produce.

So far my power output matches or exceeds a fmic, stock turbo combination.

You get to a point where the factory turbo just acts as a blockage anyway.

  • 1 month later...

I doubt you could get them for $100..If you can then you're laughing..

think about it..

REV210 is still running the standard cooler on his car and getting close to 12 second pass (or maybe already done it) and has who knows what power at the wheels.

these intercooler are on a car that already has 206kw and just as the R33 ones can handle some extra power so can these so it would be a great upgrade for someones R33 or R32 who is not looking at getting more than say 250kw at the engine... or maybe even a little more..

I think that these are worth closer to $300 from some that I have seen.

good luck.

Originally posted by MIC33R

If you were offered a FMIC, rev, would you take it and install it? I think you'd be quite pleasantly surprised :mad:

If I was offered a FMIC I'd take it.

Then I would sell it.

And have some underdrive lightweight pulleys made for the engine, perhaps also install an automatic gtst's diff center with the 4.3 gears and buy some decent wide tyres for the back with the money from the sale.

I am pleasantly suprised to beat the pants off all the poor people who got oversized frount mount intercoolers for their stock turbo'd cars (BoostD is the exception to the rule). So in the pleasantly suprised stakes I'm already pleasantly suprised at how little money I've spent.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...