Jump to content
SAU Community

Recommended Posts

Someone here posted that it is basically the same and uses the same piping but it's just thicker. If thats true then it would be a reasonable upgrade for someone like me who is only planning on running about 12psi max with the basic sort of mods to get around 200rwkw. So for the couple hundred? or so it is much cheaper than a fmic as i wont be running a bigger turbo so i wont need one. So it would provide that bit extra cooling without going overboard on a fmic. If someone could confirm that its a straight swap that would be great, also does anyone have a rough price for a second hand one?

the stock r33 unit hasn't prevented me from getting as much power as the factory turbo can produce.

So far my power output matches or exceeds a fmic, stock turbo combination.

You get to a point where the factory turbo just acts as a blockage anyway.

  • 1 month later...

I doubt you could get them for $100..If you can then you're laughing..

think about it..

REV210 is still running the standard cooler on his car and getting close to 12 second pass (or maybe already done it) and has who knows what power at the wheels.

these intercooler are on a car that already has 206kw and just as the R33 ones can handle some extra power so can these so it would be a great upgrade for someones R33 or R32 who is not looking at getting more than say 250kw at the engine... or maybe even a little more..

I think that these are worth closer to $300 from some that I have seen.

good luck.

Originally posted by MIC33R

If you were offered a FMIC, rev, would you take it and install it? I think you'd be quite pleasantly surprised :mad:

If I was offered a FMIC I'd take it.

Then I would sell it.

And have some underdrive lightweight pulleys made for the engine, perhaps also install an automatic gtst's diff center with the 4.3 gears and buy some decent wide tyres for the back with the money from the sale.

I am pleasantly suprised to beat the pants off all the poor people who got oversized frount mount intercoolers for their stock turbo'd cars (BoostD is the exception to the rule). So in the pleasantly suprised stakes I'm already pleasantly suprised at how little money I've spent.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...