Jump to content
SAU Community

Paint

66yostagea
 Share

Recommended Posts

darrinspencer Grand Master

darrinspencer

Posted
Posted

If you can find your paint code which should be on the ID plate on the fire wall, take it to somewhere like Autobarn and they can mix it up and put it into a spray pack can

It will not be 2 pak like your car and you will need to put clear over it aswell.

Link to comment
https://www.sau.com.au/forums/topic/165932-paint/#findComment-3073077
Share on other sites
GoldZilla Grand Master

GoldZilla

Posted
Posted
Recently a nasty wheelie bin attacked my RVM. I got another one from Darrin, its silver and I want to paint it dark green.

Where do you get a spray can of Stagea colours? Any Ideas?

Hugh, I'm prettty sure mine and yours are the same colour (dark green - "Sherwood Green Pearl") - the paint code is DR-2.

:closedeyes:

Link to comment
https://www.sau.com.au/forums/topic/165932-paint/#findComment-3073398
Share on other sites
Appealing Proficient

Appealing

Posted
Posted

Actually Hugh, Lots of good autopaint shops have the facility to be able to put any paint they make up into a spray can. Just check around your area. Find a really good guy who'll not only use the formula but also be able to eye match the colour. The pearls do have a different base usually but a good painter will give you the drum on the best way to match it. Don't go down to the 16 yo shop assistant and expect them to able to do it. (maybe some could). As you know age defintely gives you more experience!! Or at least it SHOULD!!

Cheers John

Link to comment
https://www.sau.com.au/forums/topic/165932-paint/#findComment-3089408
Share on other sites
66yostagea Grand Master

66yostagea

Posted
  • Author
Posted
Actually Hugh, Lots of good autopaint shops have the facility to be able to put any paint they make up into a spray can. Just check around your area. Find a really good guy who'll not only use the formula but also be able to eye match the colour. The pearls do have a different base usually but a good painter will give you the drum on the best way to match it. Don't go down to the 16 yo shop assistant and expect them to able to do it. (maybe some could). As you know age defintely gives you more experience!! Or at least it SHOULD!!

Cheers John

Well I'm the 66yo, so I should know. Will be trying it out this week end, but only on the RVM. If the match is AOK, I'll repaint the rear bar I got from Rob.

Link to comment
https://www.sau.com.au/forums/topic/165932-paint/#findComment-3091574
Share on other sites
66yostagea Grand Master

66yostagea

Posted
  • Author
Posted
lol

open Windows

press Start button (bottom left hand corner)

press All Programs (just above the Start once you've pressed it)

press Accessories

then press Paint

voila, done.

:)

I've now got a Nipple Pink RVM. Still, spose it will be AOK for the Suckers.LOL

Link to comment
https://www.sau.com.au/forums/topic/165932-paint/#findComment-3092262
Share on other sites
darrinspencer Grand Master

darrinspencer

Posted
Posted
I've now got a Nipple Pink RVM. Still, spose it will be AOK for the Suckers.LOL

Hey Hugh

Did you find any rust under the mirror?

When I removed mine to give them to you, I found a nice big hole under the left mirror, but it could not be seen when the mirror was fitted.

Link to comment
https://www.sau.com.au/forums/topic/165932-paint/#findComment-3092505
Share on other sites
66yostagea Grand Master

66yostagea

Posted
  • Author
Posted
Hey Hugh

Did you find any rust under the mirror?

When I removed mine to give them to you, I found a nice big hole under the left mirror, but it could not be seen when the mirror was fitted.

Yep. Not a lot though. The rust was not in/on the door skin, but seems confined to the pressed metal mirror mounting plate. Which seems to only have a single electrostatic coat of black paint.

Treated it with some Wattyl Killrust. Now I know how to get to it I will do the drivers side.

Getting the trim off was like ateenagers first. You know how to do it but it is a lot of fiddling about to get it in, err OFF.

Link to comment
https://www.sau.com.au/forums/topic/165932-paint/#findComment-3095562
Share on other sites
260tech Proficient

260tech

Posted
Posted
Yep. Not a lot though. The rust was not in/on the door skin, but seems confined to the pressed metal mirror mounting plate. Which seems to only have a single electrostatic coat of black paint.

Treated it with some Wattyl Killrust. Now I know how to get to it I will do the drivers side.

Getting the trim off was like ateenagers first. You know how to do it but it is a lot of fiddling about to get it in, err OFF.

Don't s'pose you would like to share the procedure? I would like to do some preventative maint/explorative myself & would be interested in the "howto" before I go ahead & stuff something up. Old age & cunning & all that..........pre-treated mirror backing plate sounds good.

Cheers GW :P

Link to comment
https://www.sau.com.au/forums/topic/165932-paint/#findComment-3099079
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...