Jump to content
SAU Community

Pics Of Design For R33 Black 300 Km/h Speedometer Kit


Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

I'm keen on the r32 dash as soon as its up for grabs :)

oh another thing, with brighter lights behind the gauge faces, the cheap kits on ebay heat up and melt.

Are there any guarantees that these wont melt?

Edited by DjeMz
just curious, how much more would it cost for the alternating number size? might be worth it's own group buy?

just a thought...

the deal would be the same with that design, we would need 30 people to commit (and actually pay hint hint) to cover the design and manufacturing costs.

I'm keen on the r32 dash as soon as its up for grabs >_<

oh another thing, with brighter lights behind the gauge faces, the cheap kits on ebay heat up and melt.

Are there any guarantees that these wont melt?

yes I'll give a money back guarantee in the case of melted gauge faces, unless you are installing 100W heater lamps into your cluster! :P

Come on guys - there was a lot more people wanting these gauges a couple of weeks ago - I've paid up surely you all can spare the 100 dollars to get these black faces dials made - 300 k speedo kit for 100 bucks is pretty good after all... From what I've seen a very cool mod.

Cheers

Come on guys - there was a lot more people wanting these gauges a couple of weeks ago - I've paid up surely you all can spare the 100 dollars to get these black faces dials made - 300 k speedo kit for 100 bucks is pretty good after all... From what I've seen a very cool mod.

Cheers

the overwhelming positive response to those who have put themselves down as definates for this kit can only be matched by the underwhelming lack of response of those who have actually paid for their speedometer kits.

so far ONLY 3 PEOPLE HAVE PAID!

the sooner people pay for their kits the sooner we can get them manufactured and the sooner you'll get them.

UPDATE: NOW 5 PEOPLE HAVE PAID! yee haa.

bloody hell ppls

its a lowsy $100... just buy one, you know you want to

yes, $100, less than a night out on the piss. so you either go out and get drunk, or you buy an R33 GTST 300 km/h speedometer kit, your choice.

Payment made just then, thanks to tuitahi for reminding me!!

Bring on the 300kmh barrier :)

thanks guys, getting to 300 km/h, slowly :(

thats 8 people paid now, 22 to go.

hmm, i would be in on this if i hadn't just been ripped off $850 by some punk for a non-existent power fc (all point and laugh).

if you're still struggling to get people to jump in on this in 2 weeks time i'll buy in

hmm, i would be in on this if i hadn't just been ripped off $850 by some punk for a non-existent power fc (all point and laugh).

if you're still struggling to get people to jump in on this in 2 weeks time i'll buy in

thanks, sorry to hear about your bad luck though.

I am now setting a DEADLINE of Friday 8th June for people to send me their payments for these gauges. If I don't receive 30 payments by the deadline then I will cancel this group buy and refund the money to those who have already paid.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
×
×
  • Create New...