Jump to content
SAU Community

Recommended Posts

Hey all,

I'm about to buy an r32 gts-t, and i would like some advice on what to do... I will have about 2 grand to tinker with, and the car already has a cat back zaust, boost gauge/controler, and a few little bits Dr_Drift is throwing in with it. :P

If anyone can give me a few ideas on what to do, it would be great.

Cheers. Matt.

Link to comment
https://www.sau.com.au/forums/topic/16719-r32-performance-mods/
Share on other sites

Originally posted by R32-GTS

ok well heres my 2 cents worth.

HI flow the stock turbo. Big front mount. 1.1bar boost. Full exhaust.

maxing out most things by now , injectors , afm but u should be close to 300hp at tread =12's.

12's.... if you can drive :P

Went for a spin in a Cefiro with RB20DET, FMIC, full exhaust, pod and HKS 2530, boost controller and 1.2 bar - put down 230rwkw. It was a drift car and had heaps of midrange. Oh, he also tweaked the restirictor to the fuel pressure reg to get slightly higher fuel press, but that was it. The car only weighed 1240kg, but if felt like it had alot more power than it was putting down. It is featured in the latest HPI - some nice photos of it going sideways.

I know that this is a bit more than 2k, but if you already have the exhaust, go FMIC and a bleeder. Then when the funds allow get a 2530 - you wont be dissapointed.

Thanks for that steve... I would love a 2530 one day, but gimme a little time! If anyone has one for sale around the $500 mark, let me know!!! (I'm optomistic...)

But the FMIC will go in. I think it already has a bleeder/control in it, so is there something else? realisticly, i will have about 800 left from that 2k, so what should i do? Get the fuel systems upgraded? Eg, bigger fuel pump, injectors, etc?

Or should i focus on a little more handling? Get adjustable shocks?

Thanks for the advice lads and lass's.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...