Jump to content
SAU Community

Mychron Light Tg

ferni

By ferni,
in Victoria

 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

ok, I've been a slack tart and haven't followed up with JP. after binning my car at Eastern Creek on sunday I was feeling a bit tight arse, but I'm back in the swing of things now. >_<

I used one of these babies on wednesday at Oran Park, and I think I'm going to flip flop and go for the non-backlit one. It's still easy enough to read whilst lapping, and wiring it up is just one less thing to do (especially since I need to use it in 2 cars).

yeah, ferni, no prob with John. I think his margain is so tight on these anyway so he surely wont mind. But I know he's keen to help us out.

Ok, so is anyone keen to get in on this thing from UAS? For the non-backlit ones (yes I look like a tool after talking up the blue ones!).

I will get a price from johnny for say, 5 units and see what he can do. He did point out that whilst these are good, he has had 2 warranty returns and honoured them both with replacement as they were not users fault.

Snowman Grand Master

Snowman

Posted
Posted

Hey just a warning to anyone thinking of getting of these unit's from the original website posted. Ours have arrived and it turns out the cable between the lap timer and the I.R. receiver is only about 50cms long. The standard cable is 2.5m long. So if you want of these things it might be best to speak to John as apparently all units in Australia come with the 2.5m cable.

Downforce Grand Master

Downforce

Posted
Posted

I know at least 3 people plus myself who want one. Have you got the pricing for 5 units yet? Please let us know. Cheers

ok, I've been a slack tart and haven't followed up with JP. after binning my car at Eastern Creek on sunday I was feeling a bit tight arse, but I'm back in the swing of things now. >_<

I used one of these babies on wednesday at Oran Park, and I think I'm going to flip flop and go for the non-backlit one. It's still easy enough to read whilst lapping, and wiring it up is just one less thing to do (especially since I need to use it in 2 cars).

yeah, ferni, no prob with John. I think his margain is so tight on these anyway so he surely wont mind. But I know he's keen to help us out.

Ok, so is anyone keen to get in on this thing from UAS? For the non-backlit ones (yes I look like a tool after talking up the blue ones!).

I will get a price from johnny for say, 5 units and see what he can do. He did point out that whilst these are good, he has had 2 warranty returns and honoured them both with replacement as they were not users fault.

Beer Baron Grand Master

Beer Baron

Posted
Posted

ok, I'm back on the case. That sucks on the 50cm cable thing. a bitch for places like eastern creek where the pit wall is on the inside of the circuit (passenger side). is there an option to order with the 2.5m timer-ir receiver cable?

Snowman Grand Master

Snowman

Posted
Posted

I spoke to AIM Sports and they said they could fix it "for a fee" and we'd have to send the units to them.

Basically I just cut my cable and spliced in a new length to make it longer with just some electrical tape and heat shrink. Its only a basic 4 core cable.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...