Jump to content
SAU Community

Recommended Posts

Yesterday,

Was laughing at a done up prelude at the lights next to me when he decided to give it. He passed me and I was laughing telling my mates that when I hit 4000rpm it'll be all over... Oh man, was I wrong! We raced upto 160km/h and I couldn't catch up to him! Is this because I'm a really bad driver, or because that car really can pull that off? I think it had a catback, mine's completely stock.

Irony is, I sold my last Prelude (GEN 4, VTec) to get a Skyline, and never dreamt that it could keep up with anything like I have now. I know stock Gts25t's are slow, but still, I would have thought I'd catch him higher up in the revs...

I think you need to read some of the threads going around here about the consequences of street racing. Not very wise doing it then admitting it on a public forum.

I fear you will be flamed serverly for this.

Good Luck!

well ill give you 2 view points...

for a street racer your an embarasment to the skyline community for even racing a VTiR in the first place , it goes to show your car is a extension of your small dick since you cant race someone worthy.

second point is that you shouldnt be racing on the road anyway. so why dont you check out this thread: http://www.skylinesaustralia.com/forums/in...=167164&hl=

Hey man .. prob not best to road race hey.. up to speed limit doesnt phase me but you breach the speed limit and its not a kewl thing..

not everyone is a saint .. but im just saying tthats how people die.

LOL thats obvious you cant drive dude. just thought share my story. my stock skyline (only got catback) smoked my mate's prelude many many times. (full exhaust and 4-2-1 header) he pulled out at 1st gear but i catch up at 2nd gears and it was game over , that was like 1.5 years ago.. and now it has 214 rwkw@12 psi just imagine.....

anyway agreed with what others said.dont do street racing.. :D

rb25det>h22a

Edited by BiAsA
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...