Jump to content
SAU Community

Recommended Posts

i have a r33 gtst its has a few mods

gt35/40 .82

highmont exhaust manifold

custom intake plenum

splitfire coils

nismo injectors

pwr intercooler

power fc

hks cams

exh cam gear

fuel pump

xf throttle body

z32 air flow meter

external wastegate

how much power yous thinks i should make and where should i get it tuned in melbourne must be good with power fc thanks

Edited by SIDEWAYS R33
Link to comment
https://www.sau.com.au/forums/topic/168001-r33-that-need-a-tune-help/
Share on other sites

Speak to rob at CREATD (i would offer my services but im flat out for another 3 or so weeks), see my signature for phone number he does GT35's and FC's all day everyday and has a few 10 second R33 gtst manuals sitting about the place.

He just finished JT from autobarn narre warrens GT35r R33 and it made around 330rwkw. They have a brand new 4wd hands free dyno dynamics which is very nice to use.

Edited by URAS
Which cars ran 10's? That's bigger news than it sounds...

MSA/CREATD black beast 10.63 @128mph or something from memory i have the vid but for some reason i cant upload ATM? there is a skyline banner instead of the upload menu??????

I think Lee out at Melbourne Performance Centre in Bayswater has one of those DataLogit things. He recently did a pretty good job on my RB25DET / Wolf combo to stop it pinging incessantly. Don't know how he is with PFC, seems to prefer Motech.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...