Jump to content
SAU Community

Recommended Posts

Hey guys.

I know that the factory speakers are 6.5in with a depth of 57mm.

However I am looking at a pair of speakers, the Polk Momo 650, and they have a depth of 61.8mm.

I am looking to run a set of these both in the front and the rear of my GTR33.

I am wondering if the extra 5mm will fit in there with little issue? Or do I really need to find a different speaker with less depth?

Thanks a lot for the help guys!

-Sayajin

Link to comment
https://www.sau.com.au/forums/topic/168333-will-a-618mm-depth-fit-in-a-gtr33/
Share on other sites

I've never pulled my door panels off yet, so i dont know what's behind them,

But when you add the 6mm MDF Spacer, wont this push the speaker out into the speaker grill? Or is there empty space between the speaker and the grill normally, which you make use of?

Edited by Trav33

easier to remake the pod. then you can fit whatever you need to. in regard to the polk speakers. 20mm total thickness will do it. be sure when you make the new pods that you put the pocket end back on.

Chris, are you talking about the pod inside the door, removing that and making custom?

yep. when you pull one apart next have a close look at it. what I am saying will then make sense.

mine even reuse the stock mounting bolts.

tried the way you do them got a complaint that a garage remote went into the door so I changed how I did them. no hassles now.

the R33 that i put the Alpines into had the factory pods, we made a 6mm speaker ring to sit inside that. took 10min max to make a cardboard template, trace that onto the MDF, cut the MDF, sand the edges to get rid of the flash, and screw straight in with the speaker - into the factory holes.

only reason we took the factory pod off was to put sound deadening on the door and inside the door.

ok I see what you are doing. they won't clear the back of the pod. for a 6.25" (IE alpine) that would work. when you put a 6.75 (IE VDO or Blau) it doesn't. thats why I remake that pod. the MTX ones will drop into those holes easily as well. done a few of those.

ok I see what you are doing. they won't clear the back of the pod. for a 6.25" (IE alpine) that would work. when you put a 6.75 (IE VDO or Blau) it doesn't. thats why I remake that pod. the MTX ones will drop into those holes easily as well. done a few of those.

as a second for this..

the vdo mps1700 splits sound great in an r33 and offer awesome bang for buck

ok I see what you are doing. they won't clear the back of the pod. for a 6.25" (IE alpine) that would work. when you put a 6.75 (IE VDO or Blau) it doesn't. thats why I remake that pod. the MTX ones will drop into those holes easily as well. done a few of those.

whats the mounting depth of VDO and Blau (havnt installed them as yet) I know Fusion 6" are bloody deep, probably a smidge deeper then Type R's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...