Jump to content
SAU Community

Recommended Posts

Subject: cOnS vX GTS300 vS HaBiBs R33 sKyLiNe[tRuE StOrY]

>

>

> After the race between My Cousins VL vs My Brothers Friends VL we pulled

> up at Muzzatech Performance in Coburg and we see Con there. Because I'm

> such good friends with Con I yell "Yalla Re how u go Bro" Con didn't

> answer me maybe he didn't see me.....because I'm such good friends with

> him he shoulda recognized me.

>

> So me and Spiro park our 6 second VL in a disabled parking spot cause

> Spiro is on workers comp and hurt his back lifting bricks. So we go inside

> to Con and ask

> "Do you sell da boost bro" Con goes Na bro but I got a VX GTS 300kw.

>

> Then Spiro goes V8's are shiit re...my cousins Skyline will rip it up.

> So we tell Spiros cousin to come down and have a race down Nicholson

> St.....he says the tram track give better traction for dragging.

>

> I know from my uncle that the Holden GTS is the fastest car that Holden

> has built its got 300kw so it can beat Ferraris cause its a V8 with 300kw

> and that it can beat all the Jap cars cause they only got 206kw....the GTS

> has 300kw so its much much faster and also the car has more than 300kw

> cause con fitted a exhaust so its got more like 450kw but con doesn't like

> to brag about how good his exhaust is.

>

> Soon Spiro's mate Habib rocks up with the R33. It has over 1000HP using

> stock internals. Habibs R33 is the 3.3 Liter version. The R32 only came

> with a 3.2 liter and the R34 a 3.4liter. That's why they are called

> R32-R34.

> Habib has run a 8 second pass using his G-Tech timer which is really

> accurate cause we recalibrated it for the altitude here on Bell St. He has

> stroked his to 5.0 liter and put a home made BOV on to control boost with.

> He also used 20 head gaskets stacked on top of each other to lower the

> comp ratio to 3.0-1.

> Even with his truck turbo and cooler he says it spools by 2000rpm

> Phwooaarr Sik Re it sounds like its mad. Habib has the number plates

> JETJET747 on his skyline cause it's the fastest Skyline in da world and

> deserves those plates. Our connection at the Vic Roads got us 9 letter

> number-plates. If use want des plates u have to speak to Mario from Vic

> Roads he can hook u up wif da plates.

>

> So we go to Nicholson St and cause my uncle is friends with da cops they

> will let us drag all the time....mate its cause we got so many

> connections. So Con has his family in the back of the VX and also his

> trailer cause V8's got so much torque they can drag race up hill with

> trailer and family in da back and still beat Jap cars.

>

> Yassu Re so the lights go green and Con stalls his GTS up to 7000rpm and

> launches at 8000rpm cause he has a Cop chip he can do this. The car does a

> Fullshick burnout and Habib puts his Skyline in drive and goes after

> him.....because Habib's Skyline is so powerful it just wheel-spins until

> 4th gear.......this means it's a really powerful car and really quick.

> Cars that can't do burnouts are slow cause if u race someone and they cant

> do a burnout on launch that means they are very slow.

>

> Wallah back to the race because we are not stupid we race on the tram

> tracks because its safer than anywhere else and its safe enough to reach

> 300kmph. Both cars are now going 140kmph and we haven't even changed into

> 2nd gear yet.... PWOARRR these cars are fast. Re.......we are a little bit

> behind Cons car and I say "Eh bro u gotta beat him quick put in more

> boost" So Habib puts his boost to 5-BAR which is pretty safe cause he has

> a Truck cooler. We start to catch Con and are neck to neck....&^%#! re

> this was getting close. By this stage we were doing 200kmph and if Habib

> lost I would have to bash him so I could impress Con and get him to work

> on my VL for free at mates rates

>

> Soon we hit 300kmph and by that stage we are winning...den my cousin calls

> me on da new Nokia phone. I tell him we are racing and he says he'll meet

> us at da finish line near Metro.

>

> Den I see da finish line and we are just in front and we beat con.....then

> we stop but der is a corner ahead..."sh1t re" I yell. We stop in time but

> con doesn't luckily his Holden GTS has FE2 suspension and he was able to

> take that corner at 150kpmh like the car was on rails.

>

>

> After we stop outside metro and see Con. He said his diff was playing up

> and he missed a gear otherwise he woulda beat us cause his is a 10 sec

> car. Also if he had a Monsta tacho he could of beaten us more easily. Dat

> race was sik though and cause we were such good racers we have been

> offered a job to teach the V8 Supercar drivers how to race properly.

>

> So we go drive round da CBD and dis hot b1tch see Habibs Skyline so I yell

> "Hey bitch get in da car" This pickup line worked so I rooted her in da

> back of da skyline an then had to drop her off cause I had to go visit my

> nonna in time for dinner.

Link to comment
https://www.sau.com.au/forums/topic/16860-vic-joke-of-the-day-rofl/
Share on other sites

Haha - I think Sniffy is right.

It's funny 'cause it's true.

The guy who works in car audio at JB Prahran was telling me about how 'he rolls up to the Maccas on the WWR - sees all these Excels and Mirages' (he has a VL) and lets them hear some 'cooler noise' to show he means business.

I said - you mean a blow off valve? - "No man - coola noise!"

Doesn't Hot4s teach these kiddies anything?

lmao james... did u go...

"ur mums a loser... ur dads a loser... ur a loser... and ur cars a pile of crap"

then show him ur fully sick R33 3.3litre Triple Turbo Quad Cam, Quad Carbie Shkyline GTS?

Haha - yes I do love multi-point fuel injected V6 boxer engines with triple webbers. Such good economy on Shell super Optimax with added unobtainium.

Mind you - I'm pretty bad myself with the 'NissanGTRPower' sticker on the back of the Lada ;)

lol.. i like to annoy people that r like that ahhahah a guy from work use to bag me allways about my commo so i just pushed his buttons buy say fluufy dice made my car go faster and i was gonna get a big holden sticker for the window cause it gave me 30 kws more at the fly wheel hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...