Jump to content
SAU Community

rb25 beemer


Recommended Posts

I've seen a RB25 in an E30, it was being done by Rollins Imports on the Gold Coast (ads in zoom if you want a no.), the actual engine fitted ok (remebering that the BMW engine bay is already designed for a straight 6 engine, but they did have issues fitting in a radiator and intercooler, so you might want to see if you can ask them about that. I've just put and RB20DET (which is the same dimensions as the 25) into my '77 520i, and it fits beautifully, looks like it was factory, but i've probably got a bit bigger engine bay. I also have no room for a FMIC, i'm running a top mount water-to-air jobbie. Thats more related to the front bar design on my car though, so you might be ok.

I notice you're in toowoomba, if you want to come and check my car out sometime (not that it's verry impressive atm), even just to compare the size of the engine bay, let me know and we can arrange something.

Hope that helps in some small way,

Cheers

Belly_up

Hope that helps in some way

Link to comment
https://www.sau.com.au/forums/topic/16887-rb25-beemer/#findComment-348433
Share on other sites

Forget it, too expensive. I had a E30 ('85) 323i rebuilt as as 2.8L. The thing is if you want a RB, you'll have to change the tranny and diff too - i popped 4 diffs. Get a 3 series inline 6 second hand, drop it in with the box and diff and turbo it. It wil boogie.

Heres some links for you:

http://www.bmauto.iinet.net.au/

http://www.bavariacars.com.au/

http://www.kormanfastbmw.com/

http://www.bmwe30.net/

I miss my E30 beemer :spank:

and heres a pic :(

Link to comment
https://www.sau.com.au/forums/topic/16887-rb25-beemer/#findComment-348959
Share on other sites

the other thing to look out for is that the BMW motors are intake on the the passenger side, exhaust on the drivers side, whereas the nissans are the other way around. So you'll have manifolding in different places from normal. for me this was a good thing, as it gave me more clearance for exhaust manifolding (my beamer has a huge steering gbox on the drivers side, i think the e30 i saw was much better in that respect), but it might be different for you.

Link to comment
https://www.sau.com.au/forums/topic/16887-rb25-beemer/#findComment-349043
Share on other sites

yeah, about 6 months after i started my RB20 conversion, i found out that if i'd looked in the right place, i could have done the BMW motor for much cheaper than what i originally thought. Although if you want to go the turbo route, you're up for a turbo, custom exhaust manifold, intercooler, possibly injectors, possibly decompression of the engine, and definately aftermarket ecu, all straight away, whereas the RB25 already comes with most, if not all of that stuff.

Link to comment
https://www.sau.com.au/forums/topic/16887-rb25-beemer/#findComment-349419
Share on other sites

I can vouch for Belly_up seeing Rolin Imports dropping the RB25DET into the E30 Beemer. It was a black car by memory. The stage i saw it in (this was well over 18 months ago) was when they just lowered the engine & tranny into it with the fabricated mounts. they were struggling for engine bay real estate, that's for sure. they had to actually cut a piece of the Rb25 timing cover to clear one of the intercooler pipes which crossed over. very tight fit. the car sat very low (stock springs?) with this engine. the guys there doubted its weight bias front to rear. i doubt it would have handled well being front heavy. i'd go down the SR20DET path if it was me and i wanted a great handling chassis. but if straight line stuff is more the go, then by all means, the RB is still a great choice.

Link to comment
https://www.sau.com.au/forums/topic/16887-rb25-beemer/#findComment-350452
Share on other sites

The 'big block' 3.5 straight six is more of an effort to fit compared to a 2.5 twin cam or 2.3-3L from a later E46. The block of the 'small block' inline 6 hasn't really changed in the last 20 years (virtually the same external dimensions), so it is much easier to drop in with minor crossmember mods etc. By memory all that is needed is a sump modification - it wil fit with stock engine mounts.

The 3.5 is also a fair bit heavier, whereas the twin cams from the later E36 on are only marginally heavier and will not disrupt the balance as much. They will more or less match the older big block single cam straight sixes for power, but less torque.

I would seriously stick to the small block twin cam six from a later car. Make sure you check out the BM Auto Engineering website i posted above - they have done E36 M3 engine / gearbox transplants into E30s and they fly...

Link to comment
https://www.sau.com.au/forums/topic/16887-rb25-beemer/#findComment-352361
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...