Jump to content
SAU Community

Recommended Posts

Something pretty major was happening on Barton Hwy today, dunno if it had anything to do with the speed camera but there were vehicle inspectors everywhere and saw around 20 cop cars between civic and the welcome to A.C.T sign

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Revenue Raising.

those cameras will pay them selves off in 2 months and then they will start working toward the next installation of cameras, so on and so fourth. My advice Dont speed unless your sure you'll get away with it, or save it for the track.

The main problem I see with these cameras is that there going to slow down the highways. I hate it wen people see a speed camera and then slow right down. If your dead on the speed limit or even over it by just a few k’s they cant book you!

And most canberrn’s drive to slow as it is. Like why don’t people understand yet that when you merge in to a 100kph lane you merge in at 100kph, not 60, 70 or 80 then accelerate slowly to 100.

When the speed camera catches your speed does anyone know if they allow for a percentage of the speed as an error.

I think I have been done doing around 60 in a 50 zone and im hoping that I can weasel out of it somehow...

The bastards have already taken my licence (it doesnt get taken off me till the 25th) and I dont want any more problems from them.

BTW dont get caught using ur phone while driving, its 3 points and $230, I learnt first hand >_<

its something around 8-10% due to computer error from memory, so 88 in an 80, 66 in a 60 etc. think this is only with old model speed cameras.

I really really really really really hate it when people drive under the speed limit, i used to do pizza delivery and i was so keen to buy a megaphone to abuse people for driving slowly, still think about buying one actually. Fair enough if its raining or the road conditions are changed but not on the parkway, if you aren't comfortable doing 80/100 then hand in your license. That and asian drivers, (sorry to the token asian here >_<) they make the best food, they are the best with technology so its only fair they can't be gifted with everything :)

  • 3 weeks later...

Hey Guys,

Just thought i would let you guys know some facts about these cameras as a friend of mine works for the company that installs all the cameras in the ACT.

General rule of thumb going around is that the cost of a speed camera will generally be recouped in 1 month from the fines it dishes out (and as little as one week in some places in Sydney). So i dont think anyone has any questions in your mind as to why they are installing them.

Red Light cameras dont actually just take a snap shot of you, they record for 10 seconds after every red light change. They have in built storage that will last a few days. They added this feature as its very hard to find out who's fault it is if someone smashes a car at a red light and you have no witnesses.

All cameras have a 10% tolerance, ie: your doing 110 the camera wont take a happy snap if you do 121 but will if you do 122, your doing 60 it wont take a happy snap if you do 66 but will if you do 67 etc. This is generally what police officers go by aswell for their handleld jobs.

Easiest way to not get caught is to not speed, i cant talk as i have lost my licence three times due to speeding offences :) although none of the times i was caught was by a mobile van or fixed speed camera (as mobile vans pick the same spots EVERY TIME and fixed speed cameras are FIXED and you are a freakin idiot if you get caught by em).

I gotta say, if these are the loop detectors or whatever, then i havnt got a problem with them. The ones in Vic on the Hume on the way into melbourne actually work because you have to slow down, so i dont see it as revenue raising. If you know they are there, you will slow down for that large section of road and their mission is accomplished. If it is a single one that you dont even know about and dont slow down, then it would be revenue raising.

sorry if its already been mentioned in this thread, i cbf reading through..

but with the underground speed cameras, i think it has to do with magnetic strips under the road that read a vehicles speed when it passes over it, but there still has to be a camera present on the ground as its impossible to get the cars rego plates without one..

the current speed cameras are all like this, if u notice on the road there is fresh concrete added, this is where the magnetic strips have been placed.. so once u pass this strip, the camera cant record ur speed..

the speed camera in between jerra and queanbeyan is a perfect example of this, as u can notice the fresh patch of concrete on the road about 10m infront of the camera.. i always speed away after this part and ive never been done..

also, this particular speed camera only gets u goin towards queanbeyan from jerra, even though they have a sign on the other side of the road saying there is a speed camera in use, it doesnt get u goin towards jerra..

Edited by EVL-R33
Anyone know whether there will be signage up for these as per all other fixed cameras?

according to the gov website:

All intersections that operate fixed speed/red light cameras have signage, advising motorists that cameras are in operation at that intersection.

I gotta say, if these are the loop detectors or whatever, then i havnt got a problem with them. The ones in Vic on the Hume on the way into melbourne actually work because you have to slow down, so i dont see it as revenue raising. If you know they are there, you will slow down for that large section of road and their mission is accomplished. If it is a single one that you dont even know about and dont slow down, then it would be revenue raising.

^^ agree, as long as they make an attempt to "look like" they are trying to slow us down.. im happy :thumbsup:

Man almost packed it when i read the locations. I went through the Federal Highway / Antill ST round'a'bout 7 times between 9pm-5am on Saturday night doing much more then 80.

I have heard many a story's of ppl buying new cars in Sydney, driving 3 hours to CBR.. then sliding up and over that first r.about, hopefully missing the poles. Where some large warning signs, or lights might have done... good to see such a civilized society, putting a fecking camera there.

  • 1 month later...

I noticed two of the new ones have been installed facing both north and south on the Parkway (just north of the Cotter Rd over pass). Does anyone know if these are live yet because the signs haven't been erected???

Has anyone else noticed if any of the other ones have been installed yet?

So looks like its time for everyone to get creative with covering their numberplates :D

I've seen videos of 2 different methods :P

One involves a mechanical device that retracts the numberplate which wouldn't be too hard, the other was creating a digital numberplate so you can just turn it off whenever you want (video: http://www.youtube.com/watch?v=qS1eW3QlaQM)

I noticed two of the new ones have been installed facing both north and south on the Parkway (just north of the Cotter Rd over pass). Does anyone know if these are live yet because the signs haven't been erected???

Has anyone else noticed if any of the other ones have been installed yet?

Noticed one on Federal highway heading towards civic, just before you hit the round about (in front of the formula hotel i think).

Its a little hidden as its behind all other signage and i didnt see any speed camera warning signs!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...