Jump to content
SAU Community

Recommended Posts

Did a search could not really find anything can someone tell me what came (as far as what parameters boost , throttle etc ) on the

series 1 standard and V-spec GTR

series 2 standard and V-spec II GTR

M-spec if it was any different

I know some models came with throttle % when others had oil pressure just want to know what models had what

Link to comment
https://www.sau.com.au/forums/topic/169073-versions-of-r34-gtr-mfd/
Share on other sites

Theres only a few variants as far as I know.

- Standard

- V-Spec with addition of intake and exhaust temps.

- Nismo with lap timer, G-meter and increased boost range. Nismo lists the oil pressure. Never seen a standard one do that.

There is the optional TV button too but that is not really interesting.

Here's the Nismo display. This is the Nismo MFD v2. Not sure what was on the v1.

post-4070-1179401649_thumb.jpg

OK, i thought the later model V-spec's may have went from throttle % to the oil pressure , i think only the british supplied cars may have had oil pressure as standard and i think they also came with the g meter so they had some features from the upgraded nismo mfd , but they did not get the lap timer

You can get the Nismo MFD as displayed in the link above. Comes with two circuit boards, software, documentation in Japanese and a boost sensor to replace your stock one. Also comes with the RS232 cable to data log to a laptop.

So yeah it's more than just a firmware upgrade.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...