Jump to content
SAU Community

Recommended Posts

hey guys. heres the story

i have a series 1.5 White r33 m spec. already have the shopping list stickers on the front of the doors as u can see in the photos. but im planning on slamming my car on its ass, painting the boot and the bonnet black. and removing the rear wing.

I want to organise a huge door length sticker from the begining of the door near the other stickers right up to the end of the car or anything close to that. maybe something like a apexi decal or even a performance sticker as i am planning on engine work. but if i was to go out and buy a sticker. where can i find them? is there a website and does anyone have any ideas. prefferably red white grey and black mixed colours in the sticker is what im looking for, but anything goes as long as it looks good. heres a pic of my car as it is. and i will update pics as i spray the boot and bonnet. and remove the wing and atm its getting the coilovers adjusted. cheers would really like some help

heres some chaddy pics i made up on paint. shit effort but heres the idea :)

i think an ignition sticker sideways along the car would look good but is it hard to get my hands on one?? any other ideas would be welcome cheers

post-29018-1179456358_thumb.jpg

post-29018-1179456379_thumb.jpg

post-29018-1179456539_thumb.jpg

hey guys. heres the story

i have a series 1.5 White r33 m spec. already have the shopping list stickers on the front of the doors as u can see in the photos. but im planning on slamming my car on its ass, painting the boot and the bonnet black. and removing the rear wing.

I want to organise a huge door length sticker from the begining of the door near the other stickers right up to the end of the car or anything close to that. maybe something like a apexi decal or even a performance sticker as i am planning on engine work. but if i was to go out and buy a sticker. where can i find them? is there a website and does anyone have any ideas. prefferably red white grey and black mixed colours in the sticker is what im looking for, but anything goes as long as it looks good. heres a pic of my car as it is. and i will update pics as i spray the boot and bonnet. and remove the wing and atm its getting the coilovers adjusted. cheers would really like some help

heres some chaddy pics i made up on paint. shit effort but heres the idea :)

i think an ignition sticker sideways along the car would look good but is it hard to get my hands on one?? any other ideas would be welcome cheers

dear god...

*just be good, try to help*

autobahn, repco, motoquip...

theres also a few people on here that make them...

i hope you got those stickers when you had something installed...

i hope you actually have something installed...

dude... please.

the car came with the stickers. and i asked the poor bloke i bought it off the same question. he said to me "dude... please"

every sticker has something installed on it. except for the veilside sticker. but the gives me no means to take it off..

the cars not a 10 second weapon but as it is i know its very quick for what it is. otherwise i wouldnt be advertising more stickers..

oh yeah. and how about these plates... [PFT-S14] or [PFT-S15] or [PFT-200] u can tel i got something against em :)

dude... please.

the car came with the stickers. and i asked the poor bloke i bought it off the same question. he said to me "dude... please"

every sticker has something installed on it. except for the veilside sticker. but the gives me no means to take it off..

the cars not a 10 second weapon but as it is i know its very quick for what it is. otherwise i wouldnt be advertising more stickers..

oh yeah. and how about these plates... [PFT-S14] or [PFT-S15] or [PFT-200] u can tel i got something against em >_<

thats fine, as long as its not a stocker :wave:

i would go pft 200 cause it will cost less...

Dr Doof where are your manners!! >_< You should be helping a Hornsbyite get some business here!!

Hey mate PM Taran on here, he makes these kind of graphics for a living and should be able to help you out.

Edited by Zilch*

Mate I like the mean jap look you're talking about, hence why my car is dropped and failry stock looking with driftek rims. I'm not too crazy about putting a big decal on a car though, I like the shopping list on the doors but if I was too ever put a graphic design on the car itself I would probably pay a fortune to have it airbrushed. Still if you like the look if it then that's what matters in the end, don't be bullied by peoples opinions of your car. Here's a pic to help you decide

post-35130-1179471827_thumb.jpg

Good luck with it and give Taran a Pm, he can point you in the right direction.

hey zilch. uve seen my car b4. i dont know if u remember. but about october last year we exchanged high beams and thumbs up on pittwater rd. u remember?? by looking at ur car im pretty sure it was u >_<

as for the sticker on the side. i get what ur saying. a huge sticker on the side will either make the car look 10 times better or 10 times worse. hopefully a nice sized apexi sticker with the emblem is what i might be lookin at. thats AFTER i crack a late 12 sec pass hopefully :wave: (with a pfc ofcourse :wave: no high hoper here)

hey zilch. uve seen my car b4. i dont know if u remember. but about october last year we exchanged high beams and thumbs up on pittwater rd. u remember?? by looking at ur car im pretty sure it was u :)

as for the sticker on the side. i get what ur saying. a huge sticker on the side will either make the car look 10 times better or 10 times worse. hopefully a nice sized apexi sticker with the emblem is what i might be lookin at. thats AFTER i crack a late 12 sec pass hopefully ;) (with a pfc ofcourse :) no high hoper here)

personally, i like the shopping list in small size down the side, it looks nice :)

and yeah, give Taran a PM, he'll help you out :)

and zilch... :) i had no idea he was local :) (as in rami, not Taran)

When doing car graphics vinyls are the best, airbrushing might be the ultimate but when you want to be able to change the graphics and see what it looks like with spending up big time, you can't beat vinyl....

Why don't you see if I can come up with a custom vinyl design that you would like.

And I can alway incorporate a tuner logo into a design.

black bonnet looks good on the cars with a nice set of dishies but ive gotta say shopping lists along with other decals have got to be the ultimate wank mod. i mean if u want to be fully sik bro then by all means go for it but god theres gotta be better ways to spend ur money. if u must get one of those greddy stickers and have it going diagonal down the side of ur car *shudders*

thanks boys... dont be shy for comments whether it would look good or not or any ideas... im just chasing that mean jap look (black bonnet black boot white deep dish wheels :)

cheers

for a mean jap look, you don't slam the car on its ass, that's australian/american, japs have it lowered to a sensible height.

Carbon fibre bonnets look jap and painted OEM look ghetto american.

Fix up that front bar, chopped front bar are lebbo style (i apologise if that term is incorrect)not jap style, they buy yourself a nice front diffuser.

For a true jap look, get a nice looking gt wing or if you are going wingless, go for the drift wing rather than leaving a gap where the orginal wing is suppsoed to be.

This is just my interpretation of a True Jap Look.

funny enough. the guy i bought the car off wasnt leb, he mustve cut the front bar out. personally yes i wouldnt of done it, and i am trying to find a front bar atm. but im not phsyked about it, and for slamming the car, i wont be ridicoulous enough to have my exhaust scraping like in most cases :rofl:, and for stickers yes they can look like wanker- mobiles but if u get the right combination happeining they can look awesome, whatever u guys think dont think im gna go for the stripey tribal look or anything, im looking for a more performance side sticker, cheers guys will keep u updated with pics

ive so far lowered the rear end... and kept the front a touch high... so the wheels dont rub against the guards when i turn.. it sits beautiful not to low and still looks mean, we have removed the rear wing but havnt painted the boot or bonnet black yet.. so far without any huge sticker it looks very good as it is.... trying to get photos organised to prove how good this can really look. we have also put a dummy sticker on the side just to see if it does work out.. 1/2 the workshop said noooo dont dont blah blah and the other half said go for it... although this sticker isnt what im after (just a logo of the performance shop im at BTA MOTORSPORT) it does look great and everyone in the workshop did agree it does look alot meaner than b4.. the sticker was big enough to cover most of the door and abit behind the door too... if i can organise some pics just to show u guys what im after.... trust me im one person who wont want my car looking like 1 of those plastic fantastic looking excels with dirty fake looking ugly stickers.... they gotta work with the car and if they dont then there not going on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...