Jump to content
SAU Community

Recommended Posts

i had my 2510 rebuilt with a garrett cartridge and as close to 2530 spec garrett exhaust wheel.... (not by GCG) had nothing but trouble with noisy bearing sound, they claimed some garrett bearing packs were naturally noisy....sounds like a cop car siren when spooling up

2 cartridges in 3 months and the thing is still noisy as hell.....been 5months and still noisey but still makes good HP so i just gave up on sorting out the bearing whine.

let me know if you have better luck cos i might freight mine over to GCG next time round.

BTW it cost me $700 for rebuild including garrett bearing pack and another $300 for the exh turbine

what causes these things to die? has the turbo in question done loads of work or is it a tune or oil supply issue? I didnt expect to hear about GTRS rebuilds as they are a relatively new model; ie still plenty of many-years-old GT2530's still going hard and strong.

what causes these things to die? has the turbo in question done loads of work or is it a tune or oil supply issue? I didnt expect to hear about GTRS rebuilds as they are a relatively new model; ie still plenty of many-years-old GT2530's still going hard and strong.

are these turbos designed to constantly and reliably run 1.3 - 1.5 bar all day everyday ...??

can a poor afr tune decrease their life?? like leaning out up top.... if so how?

I'm not sure what has caused this turbo to start blowing smoke. Unfortunately I was silly enough to purchase this second hand (off a forum member) - and I trusted him with the 'condition' of this turbo. Hopefully it is something as simple as the seals needing replacement - because the turbo had bugger all shaft play when I had it installed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...