Jump to content
SAU Community

Recommended Posts

hey guys i dont want to seem like im jumping on your thread and selling my parts,

but we already have airbox's made up for the skylines, in fibreglass and carbon fibre.

we also are about to finish of a new design of airboxs that use the standard snokel.

also, for those members who want to design there own in fibreglass, but are having trouble with where to get the materials dont be affraid to ask me, i can supply you with everythying you need or i can send you to supplier's close to you or in your state.

if you guys have any questions at all or are having trouble and need to know where you are going wrong, just let me know.

Here is a couple of pics of the fully enclosed prototype that I am making. This version is for the R33 without a front mount intercooler only. My pod filter is an M's pod which is one of the biggest on the mmrket so the box should fit pretty mucvh any pod filter.

I have not made the lid for it yet but you can see that with a lid, it will be fully enclosed and even uses the factory screws to mount it - (one at the top of the box, and one down the bottom (which you can't see in the photo).

Box without pod

Box with pod

Nice bit of fiberglassing Dude !

I got pics of mine as well now fitted up so you guys can get an idear but dont know how to post em up ! Send me an e-mail to [email protected] and I'll forward them to you.

Be warned though they are high resolution shots and 5 of em total about 12 MB so make sure youve got plenty of space !

Here is a couple of pics of the fully enclosed prototype that I am making. This version is for the R33 without a front mount intercooler only. My pod filter is an M's pod which is one of the biggest on the mmrket so the box should fit pretty mucvh any pod filter.

I have not made the lid for it yet but you can see that with a lid, it will be fully enclosed and even uses the factory screws to mount it - (one at the top of the box, and one down the bottom (which you can't see in the photo).

Box without pod

Box with pod

Looks the goods Alan :P

If you are after some airbox lid fasteners than try Dzus ones from Sportsbike in Victoria, these are used on most motorcycle fibreglass and Carbon race fairings, easy to use and pop riveted on (the base that is)

heres a link. http://www.sportsbike.com.au/accessories_dzus_fasteners.html

OK - I've now finished the lid for the box. The design is complete but there is lots of sanding and final prep work for painting to do, plus cut hole for CAI and glass in a bracket for the boost controller solenoid.

Complete with lid

Complete with lid (front view) - Yes the bonnet does close with approx 15-20mm clearance

I hope this gives you guys/gals some ideas if you want to go the DIY way. This has taken me a long time so far however - I reckon about 20+ hours. For those not prepared to make one themselves, I intend of having this design for sale in about 3-4 months.

THIS IS THE R33 VERSION.

post-27746-1184201607_thumb.jpg

http://img296.imageshack.us/img296/2053/300zx001vn2.jpg

R32 GTS-T AND GTR AVALIABLE ALSO.

AVAILIABLE IN CARBON FIBRE AND FIBREGLASS.

Got a pic and price for r32 GTR one? Any pics also, as i'm interested to see how it bolts in and how it accomodates for the pods and and factory CAI.

Cheers :laugh:

Edited by Jpowys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...