Jump to content
SAU Community

Recommended Posts

G'day all.

I'm looking to buy a Stagea soon, and am weighing up wether to import or buy from within Aus.

Just wondering if anybody's had any bad shipping experiences with their imports, and wether there's any way to prevent something happening to my car if I buy from Japan.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/170242-bad-shippingtransport-experiences/
Share on other sites

G'day all.

I'm looking to buy a Stagea soon, and am weighing up wether to import or buy from within Aus.

Just wondering if anybody's had any bad shipping experiences with their imports, and wether there's any way to prevent something happening to my car if I buy from Japan.

Thanks.

pick a good import company.

I recommend www.J-spec.com.au or Prestigemotorsport.com.au

imports101.com.au is supposed to be good too, but have not dealt with them myself.

Funkymunky is from j-spec and active on these boards.

Just check the insurance options on shipping. On the whole though, it's pretty safe.

I'm planning on going with J-spec or Prestige when the time comes.

There's a Stagea that's on J-spec at the moment which I'd buy at the drop of a hat if I had the cash right now (It's the one that's in my sig).

Just make sure u get insurance, My mate didn't and ended up having 4 space savers for mags when it arrived.... i thought it was pretty funny but he didn't.

But u take the risk and learn a lesson...

:laughing-smiley-014:

Yeah, I will definetly be getting the insurance.

I will also be getting it shipped in a container then. How much are the containers usually?

My V35 arrived last week, used K-Line and could not be happier.

Everything seems 100% in order.

There was even a small scratch that I saw in a pic that was sent to me while the car was on dock in Japan, which i can't find now, so I'm thinking they might of got bored on the trip down and buffed it out for me :bunny:

I can see you're in NSW, so make sure you request a ship to NSW. I think KIWI only go to Brisbane and the the car coems down to ydney by road. This might be quicker as there are more ships to Brisbane ( I think), but the less your car is moved and handled the better. IMO

As for insurance, my only advise would be to get pics of the car dated as close to as possible to when the car gets on the boat.

But yeah, insurance is like any other insurance. If there's a way out then they'll find it and not pay.

I paid about $1300 + $150 insurance for a container from Japan to Melbourne via an importing company.

Wow, that is cheap. It almost costs that much roll on roll off. What importing company did you use? I wanna send a container home early next year and I was expecting to have to pay at least twice that.

stephen, that's for container with car inside. if it's for your general stuff/parts etc there will be other associated costs. general rule is budget around $80 USD per cubic metre for consolidated cargo. plus that $1300 doesn't include clearance, customs, duty. You will find the actual shipping portion of roro is only about $700 or $800.

it depends a lot on size (20ft, 40ft) and where it's being loaded, and who is doing the loading etc, who is preparing the bill of lading and how many items are on it (with a car just 1 obviously). all that stuff costs $$. there are heaps of associated costs with container shipping parts/goods/etc.

when the time comes around best to just start getting prices from K-line or mitsui. both very good.

Cheers.

Gareth, what liner did you use?

Best to PM me because I don't check the forums too often.

Everything was organised by PhoenixImports, the shipping company is NYK I believe.

http://phoeniximportsaustralia.com/

As BeerBaron stated this does not include quarantine, customs or any other fees that may appear, this is JUST shipping from Japan.

Also, the car is not arriving till this Saturday, I could give you more feedback if you PM me later next week, when I get to see the car in person.

Regards,

Gareth

  • 2 weeks later...

Hi All,

Ummmm, I'm AllBlancT's Oldest daughter, & I work for a shipping company. I have no idea where these rates are coming from?????? I think $3000 is way too much (unless shipping in 40FT container, which is acceptable) The most I have seen for shipping a 20FT container $1300 (depending on quote). The only limitation on shipping a20FT container is the weight (which cannot exceed 20,000 KGS) So you pay a Full Container Load, so you can put whatever you want, as long as is does'nt exceed 20,000 KGS. You can request a container with Tie-Down Eyelets (Things to keep your car secure to the floor in the container).

Hi All,

Ummmm, I'm AllBlancT's Oldest daughter, & I work for a shipping company. I have no idea where these rates are coming from?????? I think $3000 is way too much (unless shipping in 40FT container, which is acceptable) The most I have seen for shipping a 20FT container $1300 (depending on quote). The only limitation on shipping a20FT container is the weight (which cannot exceed 20,000 KGS) So you pay a Full Container Load, so you can put whatever you want, as long as is does'nt exceed 20,000 KGS. You can request a container with Tie-Down Eyelets (Things to keep your car secure to the floor in the container).

What company is that via?

My R33s leaving Japan this Friday via NYK :action-smiley-069:

My car went via that company too, I'm just waiting for it to clear customs/quarantine and then I'll have time to see it in Compliance :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...