Jump to content
SAU Community

Recommended Posts

so you have the 90mm ti-r full titanium one?

i just called bankstown and told him how much you have them for. but he could only quote 1800. for a 32gtr

is there much difference? i'm going to need to probably modify it anyway to fit to the trust dumps as i had to modify them to fit also.

ah yeah that is the normal price. i just informed George about the list :worship: and sent the list throught to them.

i have a list of 330 items (5x greddy gtr plenums...$699 etc) i am clearing out and that 80mm PETIR exhaust was part of it, i would post up the list put i am not a sponsor and dont want to upset any one.

i do have a 90mm power evolution (v clamp with catout pipe) for R32 gtr on that list $699

Edited by URAS
  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

ah yeah that is the normal price.

i have a list of 330 items (5x greddy gtr plenums...$699 etc) i am clearing out and that 80mm PETIR exhaust was part of it, i will send the list throught to them now. i would post up the list put i am not a sponsor and dont want to upset any one.

i do have a 90mm power evolution (v clamp with catout pipe) for R32 gtr on that list $699

is that one full titanium? i've already got a 3.5 inch exhaust from dumps back. but its about 35kg!

ah yeah that is the normal price. i just informed George about the list :worship: and sent the list throught to them.

i have a list of 330 items (5x greddy gtr plenums...$699 etc) i am clearing out and that 80mm PETIR exhaust was part of it, i would post up the list put i am not a sponsor and dont want to upset any one.

i do have a 90mm power evolution (v clamp with catout pipe) for R32 gtr on that list $699

nah i have that exhaust and it's mild steel.

fat pipe though.

what's the price for the 90mm GTR32 Ti-R???

might have to upgrade...

X2

nengun sell the 90 for 1200ish. autobarn said 1800 but i want a 950 buck oner

how much difference is a 33gtr exhaust form a 32gtr?

yeah the 1800 quote was incorrect it was rrp, they should always match nengun

Edited by URAS
from what i've read. its a cat back :cheers:

The one that Luke has in the Pic's... From what he has told me basically deletes the cat soooo yeah, hence the reason it comes with the silencer i think.

I think i might deff be interested in a 80mm (R32) as well!

your going to have to post a audio/video clip of the car when the new zorst is on, i wanna hear it :D , should sound awsome with only 1 muffler, and possibly no cat.

Nengun says $1463.57 (90mm) delevered to Tassie. mmmmmmmmmm tempting, dam you giving me ways to spend money! :cheers:

Edited by sav man

as I understand it, as it is a "track" system, not the "street/circuit" model - the pipe connects straight to the end of the Front pipe - thus no cat pipe is required at all to make up this length. However I wont know for sure until I go to fit it.

Be careful with ordering this exhaust from Nengun - The box it comes in is pictured back on page 1, its bloody big! there is no way you can EMS a box this size.

The only way to airfreight would be DHL - initial quotes we were looking at to use DHL to airfreight this from Japan was in the region of $500+

so this rapidly increases the cost of the exhaust...

Trent's price at autobarn is insanely cheap - it must be 30 or 40 % below cost price - any stores here in Adelaide I spoke to about ordering this exhaust was $2k to get it for me. Sponsors on NS/SAU quoted me about $1800. The price listed on Trust website I think equates to about $1200/$1300, so when you factor in airfreight and import duty ontop of this, I was pretty happy to get mine all up for $1600 :cheers:

Edited by rb4door

nengun site says that only packages over 1.5m are a problem, and the only list the evo system as being too long. But i don't realy want to be spending money on one since I alrealy have a 80mm, and I need to upgrade my suspention. I should start a charety for myself :D

mmmmm 90mm full TI exhuasts...

that is one sexy mofo! - i highly reccomend u guys to get them if u can! the weight is insane.

as for volume - stand the F*ck back.

I'm running the Veilside 90mm Full TI cat back exhuast on the supra, its not a quiet beast...

but then again i am non turbo :D

stock cat back exhuast was 30kg + - this thing is less than 10 - its crazy.

but thats cause the TI exhuasts are thinner = louder than stainless....

plus no center muffler is bad...

but since most of u guys will have a turbo in ur cars should be a bit quieter (except on boost)

nengun site says that only packages over 1.5m are a problem, and the only list the evo system as being too long. But i don't realy want to be spending money on one since I alrealy have a 80mm, and I need to upgrade my suspention. I should start a charety for myself :D

I just measured the box, its 1.7 meters :P

Nengun wont send this to Australia unless you organise DHL

as I understand it, as it is a "track" system, not the "street/circuit" model - the pipe connects straight to the end of the Front pipe - thus no cat pipe is required at all to make up this length. However I wont know for sure until I go to fit it.

Be careful with ordering this exhaust from Nengun - The box it comes in is pictured back on page 1, its bloody big! there is no way you can EMS a box this size.

The only way to airfreight would be DHL - initial quotes we were looking at to use DHL to airfreight this from Japan was in the region of $500+

so this rapidly increases the cost of the exhaust...

Trent's price at autobarn is insanely cheap - it must be 30 or 40 % below cost price - any stores here in Adelaide I spoke to about ordering this exhaust was $2k to get it for me. Sponsors on NS/SAU quoted me about $1800. The price listed on Trust website I think equates to about $1200/$1300, so when you factor in airfreight and import duty ontop of this, I was pretty happy to get mine all up for $1600 :D

Bugger that it goes on without cat. i modified my trust dumps fo fit better and higher so modification to this titanium system will have to happen also.

p.s. I say no to Non flowing pussy! let the car breathe and let your rear bar get a coating of nice black richness!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...