Jump to content
SAU Community

Recommended Posts

I've recently bled the system.

starting at the pump above the rear diff untill fluid came out, closing that and then moving onto the bleed nipple at the transfer case. on and of and on and off untill i had the right levels in the res and untill no air came out. which not much did anyway.

now when driving/under slight acceleration there is always about 1-3kg m or whatever the reading is. it will only go to 0 when i back off completly

is this how the system is ment to work? it feels a bit better than before. and alot more responsive..

:/

Link to comment
https://www.sau.com.au/forums/topic/170507-attessa-system-for-gtr/
Share on other sites

i get about that under medium accel (in a straight line)

slight (just on pedal) accel i get 0 (in a straight line)

cornering tends to bring it back down to 0 until i lose traction (in rear)

hope that explains it a little

RellikZephyr

i get about that under medium accel (in a straight line)

slight (just on pedal) accel i get 0 (in a straight line)

cornering tends to bring it back down to 0 until i lose traction (in rear)

hope that explains it a little

RellikZephyr

ahh thanks. it appears i have bled it alrite then!

slight on pedal i am at around 3 in straight line

:P

ahh, i just got new wheels. same size front/back but different tyres. the rears are a bit worn!

Thats your problem. Try switching the fronts to the rear and vice versa. Should resolve your issue.

Cheers,

Dan :P

I found the exact same thing when I swapped out the rear tyres last wk- as little as 3mm less rear diameter is enough to trigger the ATESSA. Like Angus I'm showing around 1-3-5Kg/m on normal driving & the car responds fantastically when thrown aggressively into corners etc but I am concerned as to what this is doing to the 4WD clutches in the transfer case.

Does anyone have definite knowledge on whether this is damaging or not??

I found the exact same thing when I swapped out the rear tyres last wk- as little as 3mm less rear diameter is enough to trigger the ATESSA. Like Angus I'm showing around 1-3-5Kg/m on normal driving & the car responds fantastically when thrown aggressively into corners etc but I am concerned as to what this is doing to the 4WD clutches in the transfer case.

Does anyone have definite knowledge on whether this is damaging or not??

this is exactly my concern and question!

how good and how responive is the system now!! i'm really enjoing driving the car! this is going from using A048's all the time so i am noticing how the system actually works!

worn tyres that affect rolling diameter will indeed affect attessa , 3-5 mm is enough to cause problems

but all gtrs will throw some torque to the fronts under hard straight line acceleration

if it happens under slight acceleration/cruising then your rolling diameter is the 1st thing to look at

Yeah we know WHY it's doing it, we're both concerned as to what the consequences are.

It really has transformed the way the car drives, & def in a good way but if it's going to be at the expense of the transfer-case clutches then it's obviously not such a good thing.....

yeah rolling diameter :D.....i dont know if it was the cause of a seal on my front diff (right side)to go as the result of having slightly smaller rolling diameter tyre on the rear, and having the above mentioned symptoms??? A bit of a s#^$ to do when done at home on stands. I do have one of the controllers from Duncan..so

does anyone know if having the controller switched to constant RWD only all the time when driving, would it affect anything???I know GTR run in RWD until attessa detects wheel spin in the rear.

But my logic was if i didnt have the attessa working (constant RWD) the leak in the diff wouldnt be as bad, until i got the seal done.

Would anyone else be having the same problem??

I can't see how running in RWD only will help. The power transfer is done at the gearbox & the drive shafts, prop shaft & front diff centre are always rotating when the vehicle is motion, whether there is torque being put to them or not

As for R32/33 transfer cases, I believe they are the same animal but the ACTIVATION is different between the two. The ATESSA computer in the R33 also processes information 4x faster & the combination of the two is why the R32 is in most cases a more "tail-happy" car to drive compared to 33's & 34's.

I'm going to pull the fuse untill further notice about this! but i am loving how the car is driving at the moment.

i've tried to use my field torque controler with knobs turned all the way to rear as possible but it has no effect.

Wow, this is the first time i've ever driven the car without semi's and the system disabled.

4th gear, 80km/h (freeway onramp) around 3000 rpm. plant foot. wait till about 4000ish and i get some serious wheel spin at around 90-100kmh hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...