Jump to content
SAU Community

Recommended Posts

Hey guys

Just want some opinions on whether or not i should get a Power FC for my GTR.

I initially bought the car with "bone stock" in mind but again like before i think the mod bug has hit me again. But i dont wanna go crazy and spend too much.

I am aiming for around 200rwkw with stock boost. I dont want to run anymore than standard boost but i want that sort of figure. Is this achievable with just a 3 inch exhaust from the front pipes back with metal cat and just a PFC and 10psi? Or is it still recommended that i get a boost controller?

If this is possible i may go this way as less boost = more reliable

Opnions? Thanks!

14-15psi nets around the 250rwkw mark.

So i cant see it being impossible, more very possible... and with even less than you listed :cheers:

I reckon it could be done on the stock ECU.

Exhaust (and dumps)

10psi

Adj cam gear

Then and someone that knows what they are doing with the cam timing etc.... and you'll have 200rwkw i would safely bet.

fwiw my R33 GTR went 180kw at the wheels with nothing but a 3.5" exhaust (Kakimoto N1), compliance cat, std air filter panel and stock boost (being bled off via a leaking plenum). Looking at the ECU it may have been modded though (Japanese writing engraved across the label).

I'm pretty sure you'd get 200 with the mods nismoid suggested, exhaust, better cat, better panel and take out the boost restrictor.

Cheers

  • 4 weeks later...

^^

haha yeah - what the!?

that reminds me of my ridiculous posts on a commodore forum - because you had to have a minimum number of posts before you could sell in the trader forum. e.g.

"Yes there is a good chance it will work"

"Definitely...unless it's not what you're after"

etc etc ;)

if you're sticking with stock boost and less mods overall, it might be better to spend the money on cams and a SAFC than a pfc?

hey Phil,

like "made-guy' says, if your gonna just want those simple mods then it might be better to get an SAFC and boost controller. The safc will let ya adjust fuel corrections to lean/rich your tune as needed. The PFC would be a more complete option if you are considering further mods.

I guess it comes down to what you want

you are on 200kw's + if you know where the little restrictors are ! your Standard ECU will learn this power not a problem!

Get a PFC if you want a plug and play upgrade for bigger turbos and around the 250 260 + kilowatt's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...