Jump to content
SAU Community

Recommended Posts

I just filled up with V-Power racing for the first time (normally use BP ultimate).

I don't know if it's a coincidence or what but the car is driving like absolute crap. It started off missing as soon as I made any boost and deteriorated to the point where it is even missing at idle now.

The car was tuned on BP ultimate and has never run on anything else since then. Does anyone think the fuel is to blame?

I spoke to a friend who is fairly cluey with this type of thing and he said his Bosch 040 didn't like the V-Power racing either and mentioned something about ethanol enriched fuels being thicker than those without.

Anyone got any ideas? I advanced the timing a few degrees and that seemed to improve things slightly, but it still wasn't anywhere near behaving normally.

Either way, I am going to dump the fuel and go back to Ultimate and see if that resolves the issue.

Link to comment
https://www.sau.com.au/forums/topic/170793-shell-v-power-racing/
Share on other sites

possibly because its a higher octane fuel, better then anything else offered on pump. Harder for it to preignite, or even ignite for that matter. Hence why the tuning is normally required. Vice versa if you were to stick a low octane crappier fuel in then what you were tuned on originally, it would preignite and ignite a great deal easier, generally when knock sets in the most.

i've never had a problem. my GTR was tuned on 98. i put in the V power racing. ran fine. maybe even a touch better. the alfa race car, we had it tuned (yes it has carbies and a dizzy!) on 98. we've since run it on the v power racing and elf LMS and it was fine. It's not a major change I can't see how it made your car run poorly unless it was just a bad batch of fuel.

if it is pre-igniting you have a problem with a cylinder/piston. i think you mean detonation. they are 2 different things. pre-ignition is where there is a hot spot in the bore or piston that is igniting the fuel before the spark. on cars with carbies they will continue to run after you turn the key off untill the hot spot cools. and it melts your spark plugs, and usually ends in a warped head/cracked piston. detonation is where the fuel doesn't burn in a even pattern. instead of burning in a wave it just all ignites at once.

i don't think the tuning has anything to do with it, otherwise normal aussie built cars would run like crap when you put ultimate in there since they are only tuned for 91 octane fuel. i'd say it is a bad batch of fuel. i stopped using shell fuel after i went to a servo one night and an ambulance in front of me started then stalled before it got out of the driveway after filling up and wouldn't start again. it turned out there was water in the fuel. not sure if it was the servo's fault of a bad batch, but after that i stay clear of it just to be on the safe side.

ok i always thought that both were to do with the fuel mixture burning before it is intended to. ie. before the spark plug ignites the air/fuel mix. Whether it was to do with a hot spot or just the fuel burning unevenly was irrelevant. Thought it was the act of it occuring rather then what caused it. Suppose you learn something new everyday.

Thanks for the help, problem solved.

Stupid leaking cooler join.......Haven't driven it yet but it was literally hanging off :P I had the exhaust manifold off the other day replacing a blown gasket and mustn't have tightened one of the clamps enough.

I will stop bagging the V Power racing now :D

What fuel the car was tuned on definitely makes a difference, but i have ran vpower racing previously on my r33 and it ran good. My mate had issues with it in his bmw e46 325 though, he just tried it in his evo8 gsr yesterday and it seems to be running good as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...