Jump to content
SAU Community

Recommended Posts

Ok...have done some searches but have not found what I have been looking for.

Heard the other day(fiction or truth) that there is a Muffler that can fit a GTR33...3 inch in and out.

Made ..was told...for WRXWorld rally cars to make then quiter.

It is hand made and has a body like a 80Litre bucket.

Can any point me in the right direction...or lead me to custom muffler maker.

Cheers...Thanks in advance Tekin

OH...I need one cause I wake the whole neighbourhood up in the morning..including my kids..LOL

Link to comment
https://www.sau.com.au/forums/topic/171052-need-help-with-a-hot-dog/
Share on other sites

Thanks that Xforce electronic butterfly looks good...but it is not legal...at least I don't think so.

Currently I have DumpsHKS,Cat 3",Resinator 3" and 1 foot long(LOL),Hot Dog 3 inch.

Anyone else who knows about this Muffler?

Thanks for the replies guys.

Cheers

Tekin

:whistling:

Anyone with some names???????

Bloody exhausts - I went through this and it was an expensive exercise. Played with the originally fitted 3'' sys - put in the biggest centre muffler I could and no good. Then decided to fit a well recommended jap exhaust hks hi power silent. Very loud. Now have got a trust power extreme 2 which is ok but I'm not sure about how well it flows - it's tricky playing with exhausts - everyone has their own opinion but at the end of the day it also depends on what sort of turbo you are running as I found fitting my hks unit made the exhaust so much louder.

Good luck!

Jeez, you guys really have it bad down under. In my country its a pro if you have the loudest exhaust on your car. Its gotten so bad that NA toyota carina and corrola's decide to fit a cannon and produce horrible exhaust notes. for my car i employ a full 4" system with no cat but double resonators and a 5.5" cannon in the rear. as long as the car doesnt reach boost its quite silent, exept for those cars with too sensitive shock sensors :P. but the moment the car reaches full boost and the 2.5" screamer comes in to play, it all over a normal conversation can not take place, but it still turns heads

Ok...have done some searches but have not found what I have been looking for.

Hey,

I have a friend that can do what you want.

He is expensive, and may not want to do your job if you have no clear

goals or expectations.

Hint: you need to have a really good idea about what you want to achieve;

you need to have realistic expectations and goals; and you need to be able to afford it.

A custom stainless muffler in the dimensions of your choosing will probably set

you back in the order of $400-500 (my guesstimate, based on how long it takes

to make one and his hourly rate). You can fit a _really big_ muffler on an R32 at the back :P

Highlander Exhaust, 02 48712949. Ask for Darren, and ask for a quote. He has

made them for GTRs before (got mine through noise testing).

Regards,

Saliya

best to take it to a good exhaust shop and get them to build a centre muffler for you.

Daalder in Box Hill used to do a quiet one, but I think the guy has moved somewhere else

No room...I have been.......and don't want it to drop low...

In fact that is where I was told about this WRX muffler......

Ok, looks like I am ringing around today

Bloody exhausts - I went through this and it was an expensive exercise. Played with the originally fitted 3'' sys - put in the biggest centre muffler I could and no good. Then decided to fit a well recommended jap exhaust hks hi power silent. Very loud. Now have got a trust power extreme 2 which is ok but I'm not sure about how well it flows - it's tricky playing with exhausts - everyone has their own opinion but at the end of the day it also depends on what sort of turbo you are running as I found fitting my hks unit made the exhaust so much louder.

Good luck!

I have a power extreme 2 aswell and i think the noise level is quite resonable.. i certainly hear everyone elses aftermarkets exhausts louder than mine.

As for how well it flows. I have replaced the dump pipe with a 3" split as well as a higher flowing cat and from a stock engine increased my power by around 20-25rwkw (afer exhaust installed dynoed at 185rwkw, and i believe a standard gtst is about 160 at the wheels)

having a catback can certainly change the note and noise level but isnt going to increase performance to much if its choked as it leaves the turbo & wastegate

OK...have got in contact with an exhaust manufacturer in Melton.

Am going to see them some time soon.....they will measure up the area I have to play with.

Design what I want......manufacture and install it.......

Will keep you all posted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...