Jump to content
SAU Community

Recommended Posts

Hi Guys,

Ok. It's 6:12 in the morning and I'm at my friend's house in Higgins and his car is sitting in the parking lot in Civic. It's a Series II R33 Gts-t. Some a#$h*&^ broke into the car and tried to hotwire it! They removed the steering wheel mount covers and then played with the wiring, then when the realised that couldn't they just ripped stuff out of the car. THE CAR WON'T START! It appears that there is some cable missing... there are two plugs that dont have anything in them at the top of the steering column. Any ideas???? We checked all the fuses etc. and nothing seems to to be missing.

If anyone could help out please call me, my name is Patrick (Pat... if you don't already know me) and help us out. If you know whats wrong or could lend us the part until we could find a replacement - whatever - we would really appreciate your help.

Phone: 0411487633

Thanks guys,

Pat

Link to comment
https://www.sau.com.au/forums/topic/171155-urgent-help-please-r33-ii/
Share on other sites

sorry to hear bout the break in

by the sounds of it, some amature watched gone in 60 sec and thought he'd have a go, ur best bet would be to track down a wiring diagram and check all the wires as god only knows what they have or haven't done, or you could take the car to a auto electrician could cost a bit :thumbsup: good luck

Update::

On closer inspection after stuffing around with it in the cold at rediculous hours of the morning. we found the problem. they just unplugged a whole bunch of stuff and it was just a matter of finding out what goes where. Car started fine. only problem is we think they took off the wheel and now the Air bag light flashes and the hicas light comes on :thumbsup: anyone got any ideas on that?

Cheers anyways

ouch, never park your skyline in civic

fixed.

Particularly if you're not in the Canberra Centre Carpark - i mean its a wank, but having to have a parking ticket to leave does help slightly, not to mention being a well-lit area with reasonable amount of people walking by frequently.

Deterence is the key.

Did you have an alarm by chance?

Edited by nsanity

hi DJ,

i am having same problem as yours, not exectly same...but a bit...after the minor servicing can car started to flash the HICAS light as well... i know its somthing to do with the High Acceleration control system, But God knows why is it happeing... may be if some one will answer second part of your question in the last reply that shall help me too....

i would say best of luck....

and never leave your car in Civic man... too many P@*S head there....

rao

i am having same problem as yours, not exectly same...but a bit...after the minor servicing can car started to flash the HICAS light as well... i know its somthing to do with the High Acceleration control system, But God knows why is it happeing... may be if some one will answer second part of your question in the last reply that shall help me too....

do you have an aftermarket steering wheel?

Hi nsanity,

no, i am not sure, i bought the car right after one month of importation...therefore, i am not sure if it is aftermarket steering wheel or factor fitted one...

I believe the Original one says "Nissan" or has "SRS" airbag on it.

Anyway, the point being, that HICAS relies on many things, one of those being, the steering angle sensor in the OE steering wheel.

I have a MOMO one of some description, thusly after some time over 80km/h, HICAS light comes on.

There is about a half billion threads on this board about it (including how to get it to do diagnostics in some wierd freaky fashion) but the general thing is, if you see the light come on, its not working.

HICAS is a questionable feature anyway. Yes it does aid the driver in a little way - but if you know what it feels like to be at the edge of handling, HICAS apparently sort of blurs that feeling a little. Meaning that some drivers don't like it, others do.

I don't have it (aftermarket steering wheel) so eventually i'll get around to grabbing a set of lock bars, and pissing off the 20kg of dead weight.

Oh, and disconnecting that bastard led that always comes up.

Edited by nsanity
There is a fuse in the boot, take it out. HICAS is gone. But you still need a locking bar, and if you get hold of GTRGeoff on these forums, He can supply one no problem.

Guys thanks for the help,

Firstly, what is locking bar? Secondly, even though HICAS is not working its okey to drive on without disconnecting it... right?

thanks again...

Guys thanks for the help,

Firstly, what is locking bar? Secondly, even though HICAS is not working its okey to drive on without disconnecting it... right?

thanks again...

A HICAS lock bar is a steel bar with mounts on it that bolts inplace of the rear steering rack and holds the rear wheels completely rigid, therefore locking out the HICAS.

I drove without HICAS on for ages when my car had no speedo, the only thing that will happen is that your steering will most likely be heavy and the rear may feel a little "unsettled" as the rear wheels wont be steering but they may move slightly under load.

I dont think it will do any damage driving without it as mine is working again now after being disabled for a few months.

Edited by Bullet32
A HICAS lock bar is a steel bar with mounts on it that bolts inplace of the rear steering rack and holds the rear wheels completely rigid, therefore locking out the HICAS.

I drove without HICAS on for ages when my car had no speedo, the only thing that will happen is that your steering will most likely be heavy and the rear may feel a little "unsettled" as the rear wheels wont be steering but they may move slightly under load.

I dont think it will do any damage driving without it as mine is working again now after being disabled for a few months.

Dude thanks alot for the information,

any idea how much it will cost me to fix up the HICAS problem, since you have fixed urs....

best regards.... Rao

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...