Jump to content
SAU Community

Recommended Posts

These are the laws that will be coming in if you obtain your licence AFTER july 1st 2007 (you can confirm this at the following link)

http://www.vicroads.vic.gov.au/Home/Licens...werVehicles.htm

From 1 July 2007, new restrictions on driving high powered vehicles will be introduced for probationary licence drivers who obtain their licence from 1 July 2007.

From this date a probationary licence holder will not be able to drive a vehicle if it has:

  • An engine of eight or more cylinders;
  • a turbocharged or supercharged engine (except diesel powered vehicles);
  • an engine that has been modified to increase its performance; and/or
  • certain high performance six cylinder cars. An official list of nominated vehicles will be published on this website from 1 July 2007. In the interim it is expected to include the following vehicles:
    • the BMW M and M3,
    • Nissan 350Z,
    • Porsche (all models), and
    • Mercedes Benz SLK350.

Vehicles which are excluded from these restrictions are:

  • Turbocharged or supercharged diesel powered vehicles (without engine performance modifications);
  • all models of the Smart car, produced by Mercedes Benz; and
  • nominated vehicles with low powered turbocharged or supercharged engines. These vehicles include the following vehicles:
    • Suzuki Cappucino 2D Cabriolet Turbo 3 cylinder 689cc, and
    • Daihatsu Copen L880 2D Convertible 4 cylinder 659 cc.

The current power to weight restrictions will continue to apply for drivers who obtain their probationary licences before 1 July 2007.

If you want to buy a vehicle but you are unsure whether it has eight or more cylinders, or if it has a modified engine, or is either turbocharged or supercharged, or has any other features which would make it illegal for you to drive under the high powered vehicle restrictions, then your first step is to ask the car dealer who is selling the car. You could also contact the manufacturer directly for more information. If you are still unsure or doubt the information given, seek further advice from a licensed mechanic.

Penalties

From 1 July 2007, the penalty for driving a high powered vehicle will be three demerit points and a maximum fine of approximately $1100. These penalties will apply to both the current power to weight restrictions and the new high powered vehicles restrictions.

I am very interested in this as i am buying a nissan R33 non turbo which according to this should be fine to drive.

the power to weight ratio is

111.43 KW per Tonne

now can someone please tell me if i am missing something here that for some reason will not let me drive this car

p.s i get my licence on the 6th of july. if i buy a car this week, and then on the 1st of july the updated list says skyline r33 i will shoot everyone in my local vic roads office for screwing me around

Link to comment
https://www.sau.com.au/forums/topic/172006-new-laws-for-p-plates-summed-up/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

well yeah thats my problem. it says that they are compiling a list . but it comes out on the day the new laws come in which is ridiculous as i wanna buy a skyline BEFORE the list will be compiled. and i can see me buying it, the list coming out with my car on it. and me been stuck with a skyline i cant drive and an empty bank account.

well yeah thats my problem. it says that they are compiling a list . but it comes out on the day the new laws come in which is ridiculous as i wanna buy a skyline BEFORE the list will be compiled. and i can see me buying it, the list coming out with my car on it. and me been stuck with a skyline i cant drive and an empty bank account.

Better be safe than sorry mate,

Just wait till everything clear up first, skylines prices are going down hill FAST anyway, don't rush.

ANY modification that increases the power output by 1 or more kw's is deemed illegal.

I also heard that if a p-plater is caught "hooning" the car will be impounded (as usual), but if suspected of having more power, it can be dynoed to check.

whatever respect i had (none) for the law/vicroads/government etc etc just keeps on going down coz they don't actually come up with any beneficial laws (for motorists), just pure stupid laws.....

oh well thats life...

Edited by R-SPEC
ANY modification that increases the power output by 1 or more kw's is deemed illegal.

I also heard that if a p-plater is caught "hooning" the car will be impounded (as usual), but if suspected of having more power, it can be dynoed to check.

ur absolutely correct, any car with a engine mod (eg a pod filter) will be deemed illegal on P Plates.

it wouldnt even matter if i was riding a bike. i slap a pod on and the cops can get me for it (thats if my bike had a engine buahhaha)

but damn 3 points and $1100 fine.......f*k that hurts

Edited by R34NRG

i can picture in 20 years time when i have kids, and they grow up and there is a designated p plate cate for all drivers between 18-21 and its a tuned down toyota yarris which is locked down to not go over 95kmph

Edited by finster
I obtained my probationary licence after 1 July 2007

From 1 July 2007, new restrictions on driving high powered vehicles will be introduced for probationary licence drivers who obtain their licence from 1 July 2007.

From this date a probationary licence holder will not be able to drive a vehicle if it has:

an engine that has been modified to increase its performance;

The modifying restriction is ONLY stated on the NEW PPlate restrictions.

The page in regards to Current PPlaters, only states to abide to the Power:Weight ratio.

I dont think they will be asking current Pplaters to start pulling mods off their cars..

i just messaged the guy about the car. he said its only the muffler that is modified not the exhaust, does anyone know if this helps me or does this also increase power?

are you a current P-Plater?

Then i believe, according to their site, that we are still allowed modifications to our cars, as long as they are legal. ie legal limit exhaust etc

You'll just have to contact vicroads and ask on whats going on...

These cars are restricted under current PPlate law if anyone wondering.

pplaterestrictedimporteix8.jpg

no i am not a current p plater. i am 17 turning 18 on the 3rd of july this year

if the muffler modification does not add power then there is no reason i see that i should not be able to get car.

hrm i guess you'll just have to call up vicroads and ask what they mean by engine modifications.

Although, I doubt police will know how a standard muffler looks for every model car. As long as it aint a 20inch fart cannon.

But i could be wrong

no i am not a current p plater. i am 17 turning 18 on the 3rd of july this year

if the muffler modification does not add power then there is no reason i see that i should not be able to get car.

That sucks. Just 2 days after the date for you.

BTW First Post. Long time lurker. Hello everybody.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...