Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

looks pretty cool, didn't realise it was that easy to change over, i thought i would have to change the whole thing.

one of the bulbs is blown and hard to see the buttons at night, so will definetely doing that

thanks for the guide and the result pics. :cheers:

  DECIM8 said:
I thought you told me you wouldnt sell the LEDS seprately? :D

Now I find out great one looks like ill have to buy a set now... I just cant be stuffed pulling apart my car haha

Lies!!!! I'd sell you an old napkin if I thought you really wanted it :) I thought you meant like the individual rectangle LEDs...I can't get them.

This was the final trial and error discovery with the R33 A/C's finally a bulb!

Old napkin hey ... Been looking for one of those

Alright .. Well im guna need the R34 Setup in red and then however many other bulbs it takes to also do the air con .. including the ready made aircon ones.. Hit me with a PM on cost .. im also prob guna get some ultra bright parkers to match (white, HID WHITE) my new stock R34 xenon system :D

  • 7 months later...
  Spunky Munky said:
Where's the DIY??? I don't get it.

You take the T5 bulb, remove the bottom half with a sharp craft knife (without axing the leads) then fit it to the existing bulb holder as shown....easy >_<

So how many parts do we have to buy? Just the LEDs, or everything that in the photo? Or has most of that come from the car anyway? I need to do this desperately (actually, i need to get my "off" and "auto" buttons to work, but I didnt even know they lit up!!). Any one else have this problem?

  NA_Goodness said:
So how many parts do we have to buy? Just the LEDs, or everything that in the photo? Or has most of that come from the car anyway? I need to do this desperately (actually, i need to get my "off" and "auto" buttons to work, but I didnt even know they lit up!!). Any one else have this problem?

You jsut need two T5 LEDs, then trim them to fit in the grey plastic base that is already in the A/C

Dan

  • 1 month later...

what about the R32s can u please post a DIY on how to change the speedo lights coz i've seen those LED b4 but i dont wanna buy them because i dont know where they go, i saw the A/C lights but i wanna change the speedo lights thanx, can post some pix as well :)

  • 2 weeks later...
  666DAN said:
You jsut need two T5 LEDs, then trim them to fit in the grey plastic base that is already in the A/C

Dan

Dan, I just ordered the T10s on ur ebay site for my 33 gtst dash. All thats listed is the dash kits. What have I got to do to get the a/c T5s as well? Ive been reading around and so far word is that urs seem to be the go. :)

Also, just a general one for any1 who can help, cant seem to find a decent thread on this... the clock light and the actual climate control lcd display, ive heard its made with layers n the colour is only given on the final (or final-ish) layer... is this correct, has anyone figured how 2 change this n if so is there a tutorial? wouldn mind a blue clock to match the rest

cheers

Edited by Blayz
  • 2 weeks later...

post-41239-1207314807_thumb.jpgpost-41239-1207314807_thumb.jpg

  Blayz said:
Dan, I just ordered the T10s on ur ebay site for my 33 gtst dash. All thats listed is the dash kits. What have I got to do to get the a/c T5s as well? Ive been reading around and so far word is that urs seem to be the go. :D

Also, just a general one for any1 who can help, cant seem to find a decent thread on this... the clock light and the actual climate control lcd display, ive heard its made with layers n the colour is only given on the final (or final-ish) layer... is this correct, has anyone figured how 2 change this n if so is there a tutorial? wouldn mind a blue clock to match the rest

cheers

A picture of a r32 dash at night with red clock not the best pic but it shows what it looks like with a red t5 led instead of the normal bulb

pic was taken on a dirty ol camera phone

Edited by Oo_oO
  Oo_oO said:
A picture of a r32 dash at night with red clock not the best pic but it shows what it looks like with a red t5 led instead of the normal bulb

pic was taken on a dirty ol camera phone

hmm, the 32 and 33 clocks are situated different, but I managed to refind that thread I stumbled across ages back

http://www.skylinesaustralia.com/forums/R3...mp;hl=ac+lights

cheers

  • 2 months later...
  frozenwaffles said:
so where do we get these leds?

hmmm found a place on the net that supplies the T5 and T10 LED bulbs, as well as T5 and T10 sockets. Would it be better to buy the aftermarket T5 sockets for an R34?

http://www.ledshoponline.com/automotive_dashboard_bulb.htm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Based off what you’ve said here, I think I’ve figured out a good bit of what I’ve done wrong -  So on the line going from the PCV valve to carbon canister, there’s a T joint that is pretty much right next to that lower port - I hadn’t noticed that the hose in the diagram was curved to attach onto the carb, so I was putting that line for the lower port onto the PCV line / carbon canister line instead. I’m going to have a flick through the manual again tomorrow and should hopefully find a diagram that’ll show me where that T joint should be connected to. Timing also 100% needs to be sorted out as well, should be able to tackle that tomorrow as well. Definitely feel like I should be on the right track now though. 
    • The screw is for idle (pilot circuit) mixture adjustment. Else, I'm confused ~ the diagram shows 2 carby ports, and the intake manifold port, but you're suggesting the "2nd port on the back of the carb that isn’t mentioned in the diagrams" ...yet, both carby ports are shown...que?... ...in any event, that port should be connected, but if not (like it is now), it's unlikely to cause a backfire out the carby (it would introduce false air and give you a fast/lean idle) ...sounds more like timing issues/spark plug wire routing responsible for the backfiring.    
    • That's fair, I can see both points. I get enthusiastic when I see the FS section has a new post and want to see what interesting thing someone is selling. Then I get deflated it's a bump of a 10 year old post. Ha ha
    • Couple of litres of moonshine from his southern cousins would do it...
    • Brakes definitely won't make him faster. They only slow you down. 😛
×
×
  • Create New...