Jump to content
SAU Community

Tomei Gtr Pon-cams Rb26 - Bnr32 Bcnr33 Brand New

Beer Baron
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

Hi guys,

I have for sale a set of tomei pon cams. Type B, 260 degree in/ex and 9.15mm lift in/ex. They are to suit BNR32 RB26 and I believe they are the same part for BCNR33 RB26 too.

I have been saving them to use in my car, but I don't need them right now, I need money! So they are for sale, brand new in box. $800 pick-up or + postage to wherever you are.

These are probably the most widely used bolt in cam upgrade for GTR. offering increased resposne with larger turbos and still a nice top end gain too. they are well suited to any of the current low mount turbos around from GTSS to GTRS and everything in between, even stockies.

Thanks. :)

Blitz Grand Master

Blitz

Posted
Posted
do you need to run adjustable cam gears with these? or can you use the stock ones? cause i heard your spose to set gears at 0 degrees anyway.

You don't 'need' adjustable cam gears, though it is advisable to have them.

Betz: These are priced VERY well already and they are already here so there is no waiting.

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

hi guys, sorry for the slow reply.

anyway, these are sold pending payment and pick-up. will update if it falls through.

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

well it seems the "definate" buyer I had is mucking me about and not replying to my messages, so these are still for sale.

Turbz_13 Experienced

Turbz_13

Posted
Posted

damn wish i could afford them!!! just brought a turbo. if they are still around in a few weeks i will b interested.

well good luck with the sale!!!

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

well at this rate I'll still have them! someone give me some money. they are cheap, brand new in the box, with the little manual and even some tomei stickers!!! :bunny:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...