Jump to content
SAU Community

Recommended Posts

shouldn't my hosing work like this, this way it stops the oil from passing through the turbo??

Dude.. What the fuck?

Perhaps doing a search would let you understand how a catchcan works, and the point of it. Knowing why youre putting an aftermarket one there would probably help make you sound less stupid.

PS: Give Liz's sock back.

Arkhaeon, no need to be rude. Don't be so juvenile as to resort to calling some one stupid when they are just asking for help.

NSA11N, restricting Oil form your turbo would be bad. Just do a search on the forums for catchcans, and you should find enough info.

Well, was I wrong? I do believe calling me juvenile would be placed in the same category as calling someone stupid. I fail to see how calling a spade a spade is juvenile. If anything, I am acting as a normal twenty-something should act.

A member with 133 posts should know already how the search function works, and thus utilise said function before posting.

Pauls' initial question showed he doesnt use the search function (for a silly, commonly discussed topic), and that gets up my goat enough in itself, but then proceeding to dispute an MS paint drawing of a catchcan location, based on the turbo lines? That doesnt exactly show the greatest deal of subject knowledge.

If you want me to conform, and "Be an individual.. just like everyone else", then fine; heres' my revised post:

Hey d00d, sik engine bay! I think you need a stainless catchcan to match all those other aftermarket goodies! Keep up the good work :)

man! why can't we all just help each other? the guy asked a question! at least let him know nicely to use the search button! there is no need to be so rude! :)

and nsa11n, mines near the pod filter.. it used to be near the fuse box.. so it really depends on where you have foinf space in your engine bay! lol! :( as for which way the cables go, i have also seen many variations of this setup! unfortunately i don't know the reasons for it! lol!

If you haven't already purchsed it, and you expect to do a lot of track time, you might consider an oil seperator. It serves the same function as a catch can but also seperate the oil and feeds it back to the engine. It will cost more (prob $400 all in) but provides a "closed loop" system.

Dude.. What the fuck?

Perhaps doing a search would let you understand how a catchcan works, and the point of it. Knowing why youre putting an aftermarket one there would probably help make you sound less stupid.

PS: Give Liz's sock back.

Dude.. You're a jerk?

Perhaps doing the right thing and helping me put it in would have been a nicer approach.

And as for sounding stupid, i'm sure that you've asked many a question like this before, so play nice and do the right thing!

Paul,

Have a look at mine on sunday at S n S or saturday if you are going to JET's workshop

Mine does havethe oil/air seperator but its actually illegal to have it venting to atmosphere so Ive got a return line.

I got mine through performance wise

Actually, I read the "READ THIS BEFORE POSTING" topics, which tell you to do a search.

I could help you put it in, but you would probably just aggrevate me more in person.

Have you tried searching for ideas yet? www.google.com.au will help if you can't find any decent information on sau. I know catchcans have been covered on www.nissansilvia.com, which google should link you to.

It doesn't matter how wrong he might be or if he should have searched or if he doeesn't know something you do, there is no need for rudeness. Just cos someone doesn't know something doesn't make them stupid.

Check here. http://www.skylinesaustralia.com/forums/in...mp;hl=catch+can

Here is were I put my catch can, near the pod filter. I still have to get braided lines

I is basically beside the aircon condensor or what ever it is called mounted on a bracket that I made.

http://www.skylinesaustralia.com/forums/in...i&img=61404

Edited by 33_skyline
Well, was I wrong? I do believe calling me juvenile would be placed in the same category as calling someone stupid. I fail to see how calling a spade a spade is juvenile. If anything, I am acting as a normal twenty-something should act.

A member with 133 posts should know already how the search function works, and thus utilise said function before posting.

Pauls' initial question showed he doesnt use the search function (for a silly, commonly discussed topic), and that gets up my goat enough in itself, but then proceeding to dispute an MS paint drawing of a catchcan location, based on the turbo lines? That doesnt exactly show the greatest deal of subject knowledge.

If you want me to conform, and "Be an individual.. just like everyone else", then fine; heres' my revised post:

This guy is the breathing definition of a f**khead.

Dont worry about him. Your questions are welcome. I would also suggest looking around the forums for other catch can threads, theres a few.

Heres my custom catch can/washer bottle setup made by R.I.P.S (www.ripsltd.co.nz) in N.Z, it completly replaces the stock washer bottle, in my opinion it is one of the cleanest looking setups avaliable, i love mine, mite even send it back to rips to get it polished for that extra bling :D, my setup is just straight from the cam covers to the catch can using -10 pushlock hose for the breather lines, 2 x -10 female fittings, 2 x -10 male weld on fittings on the catch can, a custom made alloy bung for the stock pcv valve and thats pretty much it.

Heres some pics, sorry that there not the best.

JaysR33056.jpg

JaysR33057.jpg

JaysR33058.jpg

JaysR33059.jpg

100_1837.jpg

I can get some better pics if anyone wants them.

Edited by nizmo_freek
Heres my custom catch can/washer bottle setup made by R.I.P.S (www.ripsltd.co.nz) in N.Z, it completly replaces the stock washer bottle, in my opinion it is one of the cleanest looking setups avaliable, i love mine, mite even send it back to rips to get it polished for that extra bling :) , my setup is just straight from the cam covers to the catch can using -10 pushlock hose for the breather lines, 2 x -10 female fittings, 2 x -10 male weld on fittings on the catch can, a custom made alloy bung for the stock pcv valve and thats pretty much it.

Heres some pics, sorry that there not the best.

JaysR33056.jpg

JaysR33057.jpg

JaysR33058.jpg

JaysR33059.jpg

100_1837.jpg

I can get some better pics if anyone wants them.

That looks tops mate!

Awesome

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...