Jump to content
SAU Community

Recommended Posts

hi,

It could... but the best way to fix it is to incoperate your MAF sensor into your intercooling pipes, this way the computer only reads air the engine is getting....

+ it looks better than having it on the air filter...

Thats the way i'm going

hey guys i just bought a Blitz BOV and im wondering weather the power fc can tune it from crappy rev droping?
Link to comment
https://www.sau.com.au/forums/topic/172830-blitz-atmo-bov/#findComment-3179511
Share on other sites

if you put the afm in the cooler pipes wouldn't you have to put it after the bov so that it doesn't register heaps more air? if you have the bov after it, everytime you lift off and the bov opens the afm is going to register all that air passing it as going into the motor so dump heaps of fuel in (which is what happens with the afm in it's stock position. but if you have it right up against the throttle body then it is only double reading the air in a few inches of piping rather than a metre or 2 of air.

btw i am talking about on normal driving and backing off when you go to slow down, not when you are accelerating and changing gears fast.

but i also know plenty of people with r33's running atmo bov that don't have stalling issues. i was talking to a guy a few months back that has had 3 skylines, all with stock ecu and atmo bovs that had never heard of the problem (wasn't a forum user). keeping good spark plugs in them helps get rid of most of the stalling issue. i had the stalling issue with my stock bov.

also the emanage ultimate has a feature in it to help with the stalling issue.

Link to comment
https://www.sau.com.au/forums/topic/172830-blitz-atmo-bov/#findComment-3180844
Share on other sites

yeah this forum seems to have real issues with atmosphere BOV's im not sure if it is becuase the tuners are shit or if the guys just dont fit em right in the first place, personally i never have, or never will use them for various reasons but plenty of the cars i inherit to tune do and honestly 5mins in the right spots on the map stops stalling altogether.

Link to comment
https://www.sau.com.au/forums/topic/172830-blitz-atmo-bov/#findComment-3181200
Share on other sites

People have issues as they all run stock management and expect a change to the system to work normally.

Either way, i wouldnt use ATMO either.

hmm, it cant work normally

I ran 3 different times on atmo bov on my r33 (hks, blitz and apexi) on stock ecu and HAD NO ISSUE with stalling, rev dropping etc

yes the car did run richer but it drove fine e.g dont stall on me

Link to comment
https://www.sau.com.au/forums/topic/172830-blitz-atmo-bov/#findComment-3181645
Share on other sites

Screw atmo's.

Whhhhy do people still use them, they're past the point of being 'cool', no performance gains, defect target, cause idle issues and sound so try hard.

lol sounds like you got no idea.

Why would i ran my stock r33 bov when it leaks? i had issue with it on my stock turbo, why would i then put it on with my hks turbo running 16psi and over 350hp?

meh.....

Link to comment
https://www.sau.com.au/forums/topic/172830-blitz-atmo-bov/#findComment-3181646
Share on other sites

look if you are desperate to fix it

read the pfc faq in my signature

learn how to edit the ign and inj maps

do a map tracer

replicate the stalling

find out what cells it hits when it stalls

and adjust them

Link to comment
https://www.sau.com.au/forums/topic/172830-blitz-atmo-bov/#findComment-3181806
Share on other sites

lol sounds like you got no idea.

Why would i ran my stock r33 bov when it leaks? i had issue with it on my stock turbo, why would i then put it on with my hks turbo running 16psi and over 350hp?

meh.....

It sounds like you're uneducated 'Why would i ran my stock r33 bov when it leaks?'.

I'm running a bit less power than you (248rwkW) and I have had no issues with my factory BOV leaking.

Again, how did you know it was leaking or are just saying that because it doesn't make fully sic sounds.

Link to comment
https://www.sau.com.au/forums/topic/172830-blitz-atmo-bov/#findComment-3181817
Share on other sites

hmm, it cant work normally

I ran 3 different times on atmo bov on my r33 (hks, blitz and apexi) on stock ecu and HAD NO ISSUE with stalling, rev dropping etc

yes the car did run richer but it drove fine e.g dont stall on me

Its mainly based on your driving style.

I bet i could get it to stall easily, and at the same time, i could also keep it form stalling at all.

I went through it all on my own car.

Link to comment
https://www.sau.com.au/forums/topic/172830-blitz-atmo-bov/#findComment-3181900
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...