Jump to content
SAU Community

Recommended Posts

Hi guys,

can I please have a list of all the ecu numbers for R32 GTR and R33 GTR???

Why? I want replace my O2 sensors and need to be sure which ecu I'm running, it had the later R33 type crank when the oil pump let go.

The numbers on mine is partially rubbed off, I can see

a Large 30

23710 0??02

MEC R128

0621

Thanks guys, your work is most appreciated.

Thanks Lippo, so theres no chance it could be an R33 ECU?

These are the only part numbers listed for an r33 gtr ecu

Whilst the first numbers are the same the second lot on an r33 start with a 2 and end with a 0 or 1

post-27276-1230463160_thumb.jpg

Edited by W0rp3D

don't worry the 33 and 32 gtr ECUs are interchangeable anyway.

more important is the 02 sensor size, the 32 uses the smaller thread and the 33 the larger thread. You need to check that first, it normally depends on what dump pipes you have on the car (most aftermarket ones use r33 style)

And if you have a look at your part number your ecu is for a carbie fed rb26 lol, im assuming its a typo.

post-27276-1230463692_thumb.jpg

But atleast yours is an rb and not a br :blush:

Edited by W0rp3D

Duncan, whilst they do plug in, I'm fairly certain the R33 & R32 GTR o2 sensors work differently. The power fc needs to know which type you are using.

I stupidly remembered that my ECU must be an R32 as it has a chip in it, so definately a R32.

Thanks guys.

Was wondering, im trying to find out what models use the same coil packs and igniter module as mine, here is the result after loading in my vin for the igniter:

post-27276-1230376566_thumb.jpg

Does it mean that every part number listed there will work on my car?

here

post-19275-1230540798_thumb.jpg

actually I'm not sure if thats the right part no you are after, but just go into parts master and you can see where the same part has been used on other models (as above)

Cheers,

Kaz

lol

you need logic to figure it out, you boys have got no hope haha :D

Please send a cheque for $50 and I'll get back to you..

I found it in the start menu just after i posted it :D

here

post-19275-1230540798_thumb.jpg

actually I'm not sure if thats the right part no you are after, but just go into parts master and you can see where the same part has been used on other models (as above)

Cheers,

Kaz

i was wondering how many pages that would go on for before some one mentioned using the master book method. if u want to get real tricky u can also check it again Australian models if u have the AUS part of Fast loaded as well, all you need to do is open up the AUS version of fast then go into the Master book it will load with AUS info. not saying there will be any matches but it's just a thought

hey buddy after gaskets for a r32 gtst 93

rocket cover

water pump

or even a vrs kit would u know how much they normally cost? know its a low ball but worth the ask

cheers

can't help with price's but Part No. as follows

Rocker cover 13270-58S01 and 13270-58S11 LH and RH

water pump is a liquid gasket (something like ultra grey or a three bond, three bond is genuine Nissan Part No. KP710-00150)

VRS 11042-72L26

any chance of getting part numbers for 1998 R34 GTT (ER34) for the centre console .. namely the double din stereo surround (fascia), the aircon surround (fascia) and the 2 brackets that hold the aircon/stereo in the centre console thanks

also does anyone know how long nissan usually need to get these parts from japan ??

Edited by Delta Force
  • 2 weeks later...
any chance of getting part numbers for 1998 R34 GTT (ER34) for the centre console .. namely the double din stereo surround (fascia), the aircon surround (fascia) and the 2 brackets that hold the aircon/stereo in the centre console thanks

also does anyone know how long nissan usually need to get these parts from japan ??

Facia for CD player 68260-AA005

there are 2 types of brkts but i don't read japanese so cant tell which is which part No. as follows

28039-AA000 LH

28039-AA010 LH

28038-AA000 RH

28038-AA010 RH

two types for ac Fascia aswell ( think it may be a differance in the finish)

AC unit Fascia 27570-AA000

27570-AA010

Lippo is right normaly takes about 2 weeks, just depends the the stock situation in japan

Edited by neofenrir34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...