Jump to content
SAU Community

Recommended Posts

Hi

Can you please find numbers for all breather hoses on/around rocker covers RB20det HCR32.

Cheers

not sure if these are the only ones you need but.

11826-04U10

11826-72L10

11826-73L10

they are onto LH rocker cover, then to from LH to RH rocker cover, then RH rocker cover to inlet plenum

Hey there guys im just chasing order numbers or part codes for:

1995 series 1.5 R33 2 door coupe - Drivers side window surround.

1994 series 1 R33 4 door - Lower sealt belt pillar cover.

  • 4 weeks later...

Hi, just wondering if you know the part numbers for a front bumper support for my 2000 4 door GTT , i think its a series II

im after the middle and 2 side supports , they sit right behind the front bumper

and also if you can tell me how i might get my hands on some ....

i rang nissan ...was no good

thanks

Hi,

Im trying to find the part numbers for the R32 GTR bonnet lip, and N1 vents for the front bar (right and left) in gun metal grey. I appreciate that this info is in this thread somewhere but the search function is non functional at the moment and Ive looked through the thread manully with no sucsess. Any assistance is much appreciated.

Cheers, Sandy.

hey got a R32 Gts-t coupe is there a gasket 4 the fuel pump and if there is i'd like to know the part number please also the number for a rear diff pinion seal?

is there numbers for tie rod ends? R/H/F if that makes any difference?

yeah nice thread keep up the good work Thanks

Hi,

Im trying to find the part numbers for the R32 GTR bonnet lip, and N1 vents for the front bar (right and left) in gun metal grey. I appreciate that this info is in this thread somewhere but the search function is non functional at the moment and Ive looked through the thread manully with no sucsess. Any assistance is much appreciated.

Cheers, Sandy.

N1 bonnet moulding part No. 65820-06U25/ f5820-05U00

may have been replace by latter No.

Rh bar vent 62256-05U08

LH bar vent 62257-05U08

hey got a R32 Gts-t coupe is there a gasket 4 the fuel pump and if there is i'd like to know the part number please also the number for a rear diff pinion seal?

is there numbers for tie rod ends? R/H/F if that makes any difference?

yeah nice thread keep up the good work Thanks

Fuel tank sender unit/pump seal 17342-01A00

pinion seal working on r32 08/91-02/93 with hicas, RB20det. part No. 38189-N3111 (there are also 3 other option so need more info)

RHF tie rod end part No. 48520-71L25. for 2wd

in ending more info is needed for correct info

Edited by neofenrir34
Does anyone have the Part Numbers for the following:

R34 GTR with brushed silver dash -

* Ashtray

* Stereo Fascia surround

GTRdash.jpg

These numbers suit 08/00 onwards (get local nissan dealer to send a parts query to find out if they are silver)

Stereo surround 68260-AB100

Ashtray 68800-AB100

Does anyone have the Part Numbers for the following:

R34 GTR with brushed silver dash -

* Ashtray

* Stereo Fascia surround

GTRdash.jpg

These numbers suit 08/00 onwards (get local nissan dealer to send a parts query to find out if they are silver)

Stereo surround 68260-AB100

Ashtray 68800-AB100

Hi, just wondering if you know the part numbers for a front bumper support for my 2000 4 door GTT , i think its a series II

im after the middle and 2 side supports , they sit right behind the front bumper

and also if you can tell me how i might get my hands on some ....

i rang nissan ...was no good

thanks

not sure if these are wat u are trying to explain but

62216-AA010

62217-AA010

ref picture.

try your local dealer again they where most likely to lazy to look the part up

post-42804-1250152698_thumb.jpg

Fuel tank sender unit/pump seal 17342-01A00

pinion seal working on r32 08/91-02/93 with hicas, RB20det. part No. 38189-N3111 (there are also 3 other option so need more info)

RHF tie rod end part No. 48520-71L25. for 2wd

in ending more info is needed for correct info

1993 R32 GTs-T RB20DET with hicas (diff is a LSD)

model number: HCR32-290387

but thanks man :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...